HOW TO DISASSEMBLE AND CLEAN
1. Switch off and unplug the power cord from the wall outlet.
2. Turn the drum lid counter clockwise to open.
3. Turn the top-set counter clockwise and lift off the base.
4. Remove the juicing screw, strainer and rotation wiper unit from the juicing bowl. Clean with provided brush.
5. Place the juicing bowl under running water and unplug the compression silicone to clean the pulp spout.
6. Under running water, clean the outside of the juicing screw with a dish scrub. Use the tip of the cleaning brush
to push out any residue in the crevices on the bottom of the juicing screw.
7. Clean the base with a soft damp towel and dry.
HOW TO CLEAN SILICONE PARTS
TIP: Clean the rotation wiper under running water.
Thoroughly dry after cleaning. Before assembling the top-set, ensure that the compression silicone and silicone
ring are firmly inserted.
NOTE: If the compression silicone and silicone ring are not firmly inserted, juice may leak from the bottom of the
juicing bowl.
Silicone Brush
Pull out the silicone brush from the rotation wiper to clean. After cleaning, insert into the slot with the tail
pointing down as shown in the illustration.
Compression Silicone
Unplug to clean. After cleaning, firmly insert into the slot below the pulp spout.
