744778

BWT Quick and Clean Manual

14
Zoom out
Zoom in
Previous page
1/48
Next page
EN
14
5. Installation dimensions /
Space required
i
NOTE!
Prior to tting, use the dimensions
mentioned above to check whether
tting the BWT Quick & Clean lter
system is possible in the intended
space (Fig. III).
6. Installation (Fig. IV)
Prior to tting, ensure that all parts are present
(Pack contents Fig. I).
Proceed as follows to install the BWT Quick
& Clean lter system:
A) Unscrew the existing shower hose,
including the shower head from the
tting. (Fig. A).
B)
Insert washer (Fig. B, Item 1) into nut
(Fig.B, Item 2 ) and attach the BWT Quick
& Clean lter system to the shower tting
by turning the nut clockwise. Do not over
tighten
C) Insert a second washer (Fig. C, Item 1)
into the hose tting (if necessary) and
connect the shower hose to the connec-
tion thread (Fig. C, Item 7). Do not over
tighten.
D) Now open the water tap and test whether
the connections are watertight. The BWT
Quick & Clean lter system is now ready
for use (Fig. D).
i
NOTE!
During installation, please only use
appropriate tools to prevent damage
to the lter system.
Please note that, depending on the
mounting of the BWT Quick & Clean
lter system, the route of the shower
hose may need to change.
7. Operation (Fig. V)
i
NOTE!
Before starting to use the BWT Quick
& Clean lter system, please clean
your shower or bath tub thoroughly to
remove limescale and soap residue.
Proceed as follows:
Shower as usual.
E) Before rinsing the shower or tub, turn the
water to cold or lukewarm on the tting
(maximum 50 °C) (Fig. E).
F) Whilst the water is owing, activate the
lter by pressing the button (Fig. F). Inside
the BWT Quick & Clean lter system,
the water now ows through the lter
cartridge and is decalcied.
G) Now rinse all surfaces of the shower or
bath thoroughly with the ltered water.
This should take more than 10 seconds.
To nish, simply turn off the water in the
normal way (Fig. G).
H) The lter effect is deactivated by turning
off the water and is ready for normal
showering (Fig. H).
i
NOTE!
It is no longer necessary to clean using
a window scraper to prevent limescale
stains.
If the BWT Quick & Clean lter system
is active, the ow of water is reduced
to 4 litres/minute. To ensure the proper
functioning of the lter system, the
input pressure should not fall below
2 bar.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BWT Quick and Clean at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BWT Quick and Clean in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info