508282

Butler 645169 Manual

25
Zoom out
Zoom in
Previous page
1/33
Next page
25
Caution:Theprogrammedbrewingcan
besetonlywhenthe“ON/OFF”button
is set off.
CLEANING
Whencleaningtheappliance,you
should pay attention to the following:
• Removetheplugfromthemains
socket, and allow the appliance
to cool down completely before
cleaning it.
• Neversubmergetheappliance
in water and make sure no water
enters the appliance.
• Cleantheappliancebywipingit
withadampcloth.Alittledetergent
can be added if the appliance is
heavily soiled.
• Donotusescouringpads,steel
wool or any form of strong solvents
or abrasive cleaning agents to
clean the appliance, as they can
damage the external surfaces of the
appliance.
• Thelterfunnel,thepermanent
lterandtheglasspotcanbe
washed by hand in warm water with
dishwashing liquid.
• IMPORTANT!Allowtodry
completelyaftercleaning.Donot
use the appliance if it is damp.
• Alwayscleantheappliancebefore
putting it away if it is not to be used
for a prolonged period.
DESCALING
Thelimecontentofordinarytapwater
means lime scale may gradually be
depositedinsidetheappliance.This
lime scale may be loosened using acetic
acid(NOTordinaryvinegar)ordescaler,
available in supermarkets, etc.
1. Mix100mlaceticacidwith300ml
cold water, or follow the instructions
on the descaler packaging.
2. Pour the solution into the reservoir
and switch on the appliance using
the on/off button.
3. Allowhalfofthesolutiontorun
through, and then switch off using
the on/off button.
4. Switchoffforapprox.10minutes,
and then switch on again, and
allow the rest of the solution to run
through.
5. Toremovethenalresiduesof
limescale and acetic acid, pour a
pot full of cold water into the water
reservoir, switch on and allow the
water to pass through.
6. Run fresh water through the
appliance three times (as described
inpoint5).Theapplianceisnow
ready for use.
FOR UNITED KINGDOM ONLY
Plug wiring:
ThisproductisttedwithaBS1363
13-ampplug.Ifyouhavetoreplacethe
fuse,onlythosethatareASTAorBSI
approvedtoBS1362andwitharated
currentof13ampsshouldbeused.If
thereisafusecovertted,thiscover
mustberettedafterchangingthefuse.
Ifthefusecoverislostordamaged,the
plugmustnotbeused.Youmustalso
check if the socket outlets in your home
twiththeplugoftheappliance.Ifthe
socketoutletinyourhomedoesnott
with the plug, the plug must be removed
and disposed of safely as insertion of
the plug into the socket is likely to cause
electrichazard.Areplacementplug
should be wired according to following
description.
Important
Thisappliancemustbeearthed.The
wires in the cord set are coloured
thus:
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Butler 645169 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Butler 645169 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info