Manual Butler 645-095 (page 16 of 23) (English, German, Danish, Polish, Swedish, Norwegian, Finnish)

508276

Zoom out

Zoom in

1/23

4. When the 10 minutes are up, switch the

coffee maker on again and allow the

remainder of the solution to run through

it.

5. To remove the final residues of limescale

and acetic acid, pour a potful of cold

water into the water reservoir, switch the

coffee maker on and pass the water

through it.

6. Pass fresh water through the machine 3

times (as described in point 5).

7. The coffee maker is now ready for use

again.

INFORMATION ON DISPOSAL OF THIS

PRODUCT

Please note that this Adexi product is

marked with this symbol:

This means that this product must not be

disposed of together with ordinary

household waste, as electrical and

electronic waste must be disposed of

separately.

In accordance with the WEEE directive,

every member state must ensure correct

collection, recovery, handling and recycling

of electrical and electronic waste. Private

households in the EU can take used

equipment to special recycling stations free

of charge. In some member states you can,

in certain cases, return the used equipment

to the retailer from whom you purchased it,

if you are purchasing new equipment.

Contact your retailer, distributor or the

municipal authorities for further information

on what you should do with electrical and

electronic waste.

GUARANTEE TERMS

The guarantee does not apply:

• if the above instructions are not followed

• if the appliance has been interfered with

• if the appliance has been mishandled,

subjected to rough treatment, or has

suffered any other form of damage

• if faults have arisen as a result of faults in

your electricity supply.

Due to the constant development of our

products in terms of function and design,

we reserve the right to make changes to the

product without prior warning.

IMPORTER

Adexi Group

645085_IM 08/01/07 14:26 Side 16

FOR UNITED KINGDOM ONLY

Plug wiring:

This product is fitted with a BS 1363

13-amp plug. If you have to replace the

fuse, only those that are ASTA or BSI

approved to BS1362 and with a rated

current of 13 amps should be used. If there

is a fuse cover fitted, this cover must be

refitted after changing the fuse. If the fuse

cover is

lost or damaged, the plug must not be

used. You must also check if the socket

outlets in your home fit with the plug of the

appliance. If the socket outlet in your home

does not fit with the plug, the plug must be

removed and disposed of safely as

insertion of the plug into the socket is likely

to cause electric hazard. A replacement

plug should be wired according to follow-

ing description.

Important

This appliance must be earthed. The wires

in the cord set are coloured thus:

BLUE- Neutral, Brown-Live, Green& Yellow-

earth (For detachable plug only)

As the colours of the wires in the mains

lead of this appliance may not

correspond with the coloured markings

identifying the terminals in your plug,

proceed as follows:

The wire that is coloured Green& Yellow

must be connected to the terminal in the

plug that is marked with the letter E or by

the earth symbol, or coloured green&

yellow.

The wire that is coloured blue must be

connected to the terminal that is marked

with the letter N or coloured black.

The wire that is couloured brown must be

connected to the terminal that is marked

with the letter L or coloured red.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Butler 645-095 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Butler 645-095 Manual

Product: