481964

Bushnell X-8 TRAIL CAM Manual

17
Zoom out
Zoom in
Previous page
1/128
Next page
17
• The PIR indicator light below the lens will blink when you have
entered the coverage area.
• Adjust the camera position as needed and repeat the test until the
desired coverage area is achieved.
• Press the Setup button again when you are nished using the test
mode-the camera will be “sleeping” and waiting for the PIR sensor to
trigger the rst photo or video capture.
• Maximum PIR sensor range is approx. 45 ft.
5. Secure the Camera
A standard padlock may be used in the camera’s lock hole to secure it and
prevent theft.
6. (Optional) Using an External Power Source
Optionally, you can connect an external 6V DC power source (not
provided) to the “DC In” jack at the bottom of the X-8 Trail Cam, under
the rubber pad around the tripod socket (pg. 6). Please be careful to use
a compatible power source, making sure that the voltage, minimum
current rating, and connector polarity are all correct. If both an external
power source is connected and batteries are installed, the X-8 trail cam
will be powered by the external power source.
External Power Source Specs: 6 volts DC, 1000mA (1A) minimum
current, positive tip connector polarity (+ tip/- sleeve).
VIEWING THE PHOTOS and VIDEOS
Reviewing the photos and/or videos your X-8 camera has captured can
be done by one of three methods:
Using an SD Card Reader
1. Push the SD card in slightly to release it then pull it out gently.
2. Put the SD card into any of the widely available SD card readers
(either a dedicated SD card reader or “multi-card reader” that
features slots for several dierent memory cards, including SD
cards).
3. Follow the card reader supplier’s directions to view or download the
photo and/or video les on the SD card.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bushnell X-8 TRAIL CAM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell X-8 TRAIL CAM in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info