Manual Bushnell TROPHY CAM XLT 119435 (page 7 of 101) (English, German, French, Italian, Portuguese, Spanish)

559497

Zoom out

Zoom in

1/101

12 13

Using the SETUP Menu to Change Settings

The main purpose of the SETUP mode is to allow you to change the settings

of the camera’s parameters (12-13 different ones are available) so your

Trophy Cam operates exactly the way you want it to. You will do this by

entering the SETUP Menu and pressing the keys below the LCD display,

which will show you each parameter and its setting.

Changing Parameter Settings in SETUP Mode

A wide range of options or “parameters” are provided to allow you to set

the Trophy Cam to your operational preferences. To change the setting of

any parameter you must ﬁrst switch to the SETUP mode. Once in SETUP

mode, pressing the MENU button will allow you to select any parameter and

change its setting. The name of the parameter and its current setting will be

shown on the LCD. Pressing the RIGHT or LEFT key scrolls to the next or

previous parameter (RIGHT key to move on to the next parameter and LEFT

key to go back to the previous parameter), and pressing the UP or DOWN

key lets you select a different setting for the currently displayed parameter.

Once you have selected your preferred new setting for a parameter, press

the OK button to save the new setting (actually change it). When have are

ﬁnished changing the settings of one or more parameters, press MENU

again to exit the SETUP menu. MENU can also be pressed anytime you

want to cancel changing a parameter’s setting after a new setting has been

selected (but OK has not been pressed yet). After setting the parameters

to your preferences, be sure to move the switch to ON to begin actually

taking photos or videos. No images will be captured if the switch is left in the

SETUP position (unless you press the RIGHT/Shot key after exiting the menu)-

in fact, the camera will power off automatically after a few seconds with no

key pressed.

Color Viewer vs. Standard Display Models

There is a slight difference in how the settings for a parameter are shown

between the two different types of Trophy Cam models:

• On models with a color viewer, all the available settings for the currently

displayed parameter are shown on one screen, with a checkmark next

COLOR VIEWER

(4a)

(4b)

(4c)

Fig. 4: Selecting Parameter Settings

to the current setting (Fig. 4a). To change the setting, ﬁrst use the UP/

DOWN keys to highlight (select) the new setting you want (Fig. 4b), then

press OK to “Execute” the actual change to the selected setting. The

checkmark will appear next to your new setting to conﬁrm this (Fig. 4c).

• On models with standard (non-color) display, only one setting is displayed

at a time, starting with the current setting for the parameter when it is

ﬁrst selected (Fig. 4d). To change the setting, use the UP/DOWN keys

to display the new setting you want (Fig. 4e), then press OK to “Execute”

(make the actual change to this setting). If you want to conﬁrm this setting

is now the current one, just press the RIGHT key to scroll to the next

parameter, then press LEFT to go back again to the previous one. You

should see the parameter setting you just made.

STANDARD DISPLAY

(4d)

(4e)

Press MENU

Press DOWN

Press OK

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell TROPHY CAM XLT 119435 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell TROPHY CAM XLT 119435 Manual

Product: