481956

Bushnell Onix 400-2 Manual

20
Zoom out
Zoom in
Previous page
1/32
Next page
20
Let’s take a look at the basics of setting up and using your Map Areas...
How to Define a New Map Area (Using “Fence Posts”):
• Click the HOT button to get the HOT menu, then press “+” to switch
to the “My Stuff” menu.
• Highlight “My Map Areas” and press OK-you will see “Create New
Map Area”, already selected. Press OK.
• A default name for the new Map Area is assigned (MPA001), and
you’ll see 3 options: Add Fence Post, Edit Name, and Delete. You can
edit the name of the Map Area now, or change it later. Select “Add
Fence Post” and press OK. The default name for your first Fence Post is
“FP001”, this can be changed later if you like.
• Use the 4-way keypad to move the Fence Post if you need to ne
tune its location (zoom in first with the “+” key if necessary.
• Once you have the rst Fence Post where you want it, press OK to
confirm and set it. Its name will then be displayed under the Map Area
heading (MPA001). Press OK or the RIGHT key to see these options
(Fig. 35)
:
Insert After-press OK to place the next Fence Post where the first
is (you can then move it elsewhere with the 4-way keypad), or press
the RIGHT key to see options for placing the next Fence Post based
on a waypoint, POI, your current location, etc.
Move-change the position of this Fence Post
Edit Name-change the name for this Fence Post
Set as Post #1-after selecting a previously placed Fence Post, select
this option and press OK to use the same Fence Post as the starting
point of a new (adjacent) Map Area.
Delete-erase the Fence Post
• Keep using “Insert After” to add Fence Posts until you have placed
at least three or four to define the boundaries of the Map Area you
are creating. Press EXIT or the LEFT key to see the Map Areas List, with
your new Map Area added. With the name of the Map Area selected,
press the RIGHT key to view the Area on the base map, with lines
visible between the Fence Posts. The Info Box at the bottom of the
display will automatically show the total area (in square miles) of
the Map Area. If your Map Area is very small, the Info Box changes to
square feet instead of miles. If you need to know the area in acres, 1
sq. mi.=640 acres, so simply multiply the number in the info box by
640. For small areas, divide the square feet by 43560 to see the total
area in acres.
• Press EXIT to return to the Map Areas list. Press OK to see the list of
USING YOUR ONIX400 GPS RECEIVER : Creating a Map Area
Fig 36. Map Area
Options List
Fig 35. Map Area
Fence Post Options
Fig 34. Completed
Map Area-built with 4
fence posts
Sq. Miles
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bushnell Onix 400-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Onix 400-2 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info