481956

Bushnell Onix 400-2 Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
17
The SAT Page (Fig. 25)
As seen earlier in “Getting Started”, the SAT page view is used to identify the
quality or strength of the satellite signals being received by the unit. The Info
Boxes on the bottom of the satellite page are used to identify your location,
shown as Location (latitude, longitude) and Altitude (above sea level). The
items displayed on the satellite page view are fixed, and cannot be changed
by the user, so there is are no options or settings menus for this page.
The SET Page
The SET page user options (Fig. 26) include all the following:
• User Profile (Fig. 27)-select to customize and set various display options.
You can save different sets of screen configurations that are best suited to
your different activities.
To save a profile, select an activity from the list (hiking/camping, etc), then
press the right arrow to save your current display configuration under that
name. The checkmark indicates the current active profile. One “custom” user
profile may bet setup and selected in addition to the other five pre-named
profiles for common activities (Hiking/Camping, Hunting, Inland Boating,
Ocean Boating, Geocaching, Custom). You may also choose to “Reset to
default” instead of saving your current settings as one of the
profiles-this
restores the original factory default screen configuration (display options
for all pages).
• GPS-press the right button and select GPS satellite reception “ON” to for
normal GPS operation, select “OFF” to conserve battery life if you are not going
to be navigating and only want to use the XM weather or entertainment
services, or while you are getting more familiar with your ONIX indoors
where GPS reception is not possible. Two other options are available:
WAAS (Wide Area Augmentation System)- turning WAAS on will provide
slightly better GPS accuracy in the United States. As this can decrease
battery life, you may want to keep it turned off for most normal navigation
activities.
Cold Start Receiver-press OK to re-activate GPS satellite reception (“cold
start”). This will force the ONIX to clear the satellite “almanac” information,
which is stored automatically during the first power-on to speed up the
process of choosing the best GPS satellites for your usual starting area.
If this almanac data is no longer valid, it will cause longer startup times.
Enabling a cold start is recommended if you have re-located to a new
area that is over 300 miles away from your last power-on position. Note
that this will only take effect the next time the unit is powered on-there is
no advantage or reason to force a cold start if the unit has already locked
onto satellites in a reasonable amount of time, and are still within about a
300-mile radius of the location where you first powered up the ONIX.
• Compass-options to select your preferred navigation display units (Degrees,
Cardinal Letter, or Mils) and North Reference (True or Magnetic).
EXPLORING THE PAGES : The SAT and SET Pages
Fig 25.
SAT Page
Fig 26.
SET Page
Options List
Fig 27.
SET Page
User Profiles
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bushnell Onix 400-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Onix 400-2 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info