Manual Bushnell Onix 400 -1 (page 26 of 28) (English)

481955

Zoom out

Zoom in

1/28

Speciﬁcations and designs are subject to change without

any notice or obligation on the part of the manufacturer.

FCC Compliance Statement

is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) is device may not cause harmful interference, and

(2) is device must accept any interference received, including interference that may cause undesired

operation.

NOTE: is equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. ese limits are designed to provide reasonable protection against

harmful interference in a residential installation.is equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

· Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver

· Connect the equipment into an outlet on a circuit

diﬀerent from that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV

technician for help.

Note: e ONIX complies with Part 15 of the FCC interference limits for Class B digital devices

FOR HOME OR OFFICE USE. ese limits are designed to provide reasonable protection

against harmful interference in a residential installation, and are more stringent than “outdoor”

requirements.

e ONIX does not contain any user-serviceable parts. Repairs should only be made by an Authorized Bushnell

repair center. Unauthorized repairs or modiﬁcations could result in permanent damage to the equipment, and

will void your warranty and your authority to operate this device under Part 15 regulations.

e shielded interface cable which is provided must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

ONIX400 1LIM QS Guide-Feb08 Revi26 26 2/20/08 8:56:07 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Onix 400 -1 in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell Onix 400 -1 Manual

Product: