481954

Bushnell Onix 350 Manual

23
Zoom out
Zoom in
Previous page
1/28
Next page
23
USING YOUR ONIX350 GPS RECEIVER : Name & Icon Editing
You will see the SafeTrack screen (Fig. 43), with a count down delay (time can
be adjusted in the Set Page Menu) before the unit enters SafeTrack mode. If you
accidentally hold the HOT button down, select “Cancel” and press OK. If you
do not cancel, at the end of the countdown, the unit will be in SafeTrack mode.
e display will black out. e ONIX will automatically make GPS satellite
contact every 5 minutes (default, can be changed in SafeTrack Options menu),
which extends battery life significantly while still allowing you to instantly get a
fix on your location and resume navigation when you exit SafeTrack mode.
As long as you are actively using the GPS and pressing buttons (within time
limit set in SafeTrack options (Fig. 44), the screen display will stay active-but
the unit is still in SafeTrack mode.
After a period of inactivity (length of time selectable in SafeTrack options menu),
the Start SafeTrack screen (Fig. 43) will appear.
If you do not want to return to SafeTrack, press OK or LEFT with “Cancel”
selected.
How to Create/Edit Names for Waypoints, Trails, Map Areas, etc.
(Using the Type Tool)
With “Edit Name” selected, click OK to bring up the Type Tool, a “virtual
keyboard” (Fig. 45). is is a multi-function tool that is controlled by the 5-way
button. Your currently selected character is highlighted. Move LEFT/RIGHT
or UP/DOWN to select letters, then press OK to enter your selected character-
you’ll see it appear in the name near the top of the display. Use the LEFT/
RIGHT keys to move around in a row (it “wraps around” when you go past
the 1st or last character in a row), and use UP/DOWN to move through the
columns. e Text Tool automatically switches to lower case after starting a
word with upper case, but you may use “SHIFT”(select, press OK) to change it
anytime. Use “back” to backspace if you make a mistake, or to delete the default
“WPT 000” assigned to a new waypoint before starting to “type” your preferred
name for it. To switch from letter characters to numbers or symbols, press the
“+” or “-“ buttons (you will see the tabs at the top of the Text Tool change).
Once you are finished creating or editing the name for your waypoint, trail, etc,
be sure to select “done” and press OK to actually confirm and enter the name in
the memory of the ONIX350.
How to Set or Edit Icons
With “Edit Icon” selected, click OK and the display will show a menu of icons
(Fig. 46), or common symbols, that you may choose to represent your waypoint
on the map. If you have previously set up a user profile for a particular type
of activity (for example, camping), the group of icons that appears in the icon
selection menu will be the ones most relevant to that activity. Simply use the
LEFT/RIGHT and UP/DOWN keys to move around the available icons, press
OK to select one (you will see it appear next to the name at the top of the
display), then select “done” and press OK again to confirm and enter the icon,
so it appears on the map along with the name.
Fig 43.
SafeTrack
Screen
Fig 44.
SafeTrack
Options
(select “Options”
from SafeTrack
Screen)
Fig 46.
Waypoint
“Edit Icon”
Fig 45.
Type Tool-
Editing a
Waypoint Name
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bushnell Onix 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Onix 350 in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info