Manual Bushnell Onix 350 (page 18 of 28) (English)

481954

Zoom out

Zoom in

1/28

Setting Waypoints

e simplest GPS function is to mark your present location, so you can ﬁnd it again

later. Any location that you choose to mark is called a “waypoint”. To set a waypoint

at your current position, just press “OK” (center of the 5-way button). You will see

the Waypoint Menu (Fig. 26), with a numbered default name assigned to the new

waypoint (WPT000, WPT001, etc) shown at the top, with these options below

it: Edit Name, Edit Icon, Activate Alert, Set Waypoint. Since “Set Waypoint” is

already highlighted, simply press OK again to accept “WPT###” as the name and

create a waypoint at your current position. Or, scroll up to edit the new waypoint’s

name and/or icon before setting it-this might make it easier to nd later (see “How

to Create/Edit Names..” and “How to Set/Edit Icons” for details). After editing the

name and/or icon, go down to “Set Waypoint” and press OK-you’ll then see the

new waypoint on the map with the name and icon you gave it. If you decide not to

set the waypoint, simply press EXIT or the LEFT key.

To set an alert beep to signal anytime in the future when you return to the waypoint,

select “Activate Alert” and press OK to set the alert (repeat to De-Activate previously

set Alerts).

Of course, you can always rename a previously set waypoint, change its icon, or

delete it entirely at any time in the future. Press the HOT button, then “+” to view

the “My Stuﬀ” menu. Select “My Waypoints”, press OK, then select the previously

set waypoint you want to work with from the list. Press OK, and you will see the

Waypoint Options menu (Fig. 27). Along with the same options you saw when you

originally created the waypoint (Edit Name, Edit Icon (Fig. 28), Activate Alert),

you can navigate to the waypoint, or delete the waypoint completely (there is a

conﬁrmation step to prevent accidentally deleting an important waypoint).

Creating a Map Area (My Map Areas)

A special feature available on the MAP page lets the user deﬁne a polygonal (triangle,

square, etc) area of any size, placed anywhere, which can then be used to simply

measure that area (show the total sq.mi. or sq.ft.), help deﬁne map and property

boundaries, and/or generate an alert message when the area is either entered or

exited. is is done by placing a minimum of three virtual “fence posts” on the map

which are used to deﬁne the limits of the area (Fig. 29). e process for setting up a

custom Map Area is outlined on the next page. More information about utilizing

the “My Map Areas” features can be found at: http://www.bushnell.com/gps/

by clicking the Product Support link.

Let’s take a look at the basics of setting up and using your Map Areas...

USING YOUR ONIX350 GPS RECEIVER : Setting Waypoints / Map Areas

Fig 26.

Waypoint

Menu-Press OK to set

new waypoint

Fig 27.

Options for

previous waypoints:

Navigate To, Edit

or Delete

Fig 28.

Waypoint

“Edit Icon”

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Onix 350 in the language / languages: English as an attachment in your email.

The manual is 7,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell Onix 350 Manual

Product: