Manual Bushnell Imageview 118200 (page 14 of 88) (English, German, French, Italian, Portuguese, Spanish)

559528

Zoom out

Zoom in

1/88

FOCUSING

1. Adjust interpupillary distance. (Figure 1)

Set the “diopter setting” (Figure 2) to zero and view a distant object.

3. Keep both eyes open at all times.

4. Using a lens cover or your hand, cover the objective (front) lens of

the same side of the binocular that has the “diopter setting.” This

is usually the right side.

5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick wall,

tree branches, etc.) until it appears as sharp as possible.

6. Un

cover the objective lens on the diopter side, cover the other objective lens, then view the

same object.

7. Using the “diopter setting” adjustment ring, focus the same object being viewed. Caution

should be used as over turning or forcing the diopter eyepiece can cause damage or cause

the eyepiece to break away from the chassis.

8. Your binocular should be adjusted for your eyes. Focus at any far or near distances can

now be attained simply by turning the center focus wheel. Make a note of the diopter

setting for your eyes for future reference.

EYECUPS (Figure 3)

Your Bushnell binocular is fitted with rubber roll-down eyecups

designed for your comfort and to exclude extraneous light. If you wear

sun/eyeglasses, roll down the eyecups. This will bring your eyes closer

to the binocular lens thus providing improved field of view.

DIOPTER SETTING

Fig. 2

ROLL-DOWN EYECUPS

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Imageview 118200 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell Imageview 118200 Manual

Product: