Manual Bushnell Imageview 118200 (page 8 of 88) (English, German, French, Italian, Portuguese, Spanish)

559528

Zoom out

Zoom in

1/88

TAKING A PICTURE

With the camera turned on, press the SNAP button to take a new photo. For best results, hold

the

ImageView steady using both hands, and lightly press down the SNAP button using the

flat

end of your finger rather than “punching” it with a fingertip. Be sure you are at least 30

feet

away from your subject as the camera focus is preset for optimum results with distant

objects (ie: sports, wildlife, etc.).

CHANGING

OPERATIONAL MODES

Pressing the MODE button briefly will cycle through several special camera modes and settings.

corresponding icon or symbol (indicated in parentheses below) will be displayed on the LCD

for each mode as you cycle through them by tapping the MODE button,

and blink unless you

select or confirm it with the SNAP button (icon will stop blinking). If no button is pressed for

mor

e than 5 seconds, the camera will return to normal operation. The modes/settings are

shown as you cycle through them in the following order:

• T

imer ( ) : selects the self-timer, which will take a photo after a 10 second delay when you

press the SNAP button. This

is useful for avoiding blurry photos from bumping the camera

when it is mounted on a tripod (optional), especially in low light conditions. Once set, the

camera will remain in self timer mode until you return to the timer mode setting and turn

it off.

• R

epeat Shot ( ) : Takes rapid series of 3 consecutive photos, approx. 1 second apart,

when you press and hold the SNAP button. As with the timer, the camera will remain in

Full

Low

Dead

Full

Low

ead

022

***

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Imageview 118200 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell Imageview 118200 Manual

Product: