Manual Bushnell Imageview 111210 (page 6 of 108) (English, German, French, Italian, Portuguese, Spanish)

559523

Zoom out

Zoom in

1/108

to check the camera aim and focus before taking a new photo. To turn the unit off, press and hold the

MODE button

until the display goes out and the camera beeps 3 times. The camera will turn itself

off automatically to save batteries if it is left inactive for one minute. When connected to a PC for

downloading photos, the camera draws power from the USB port.

TURNING THE DISPLAY ON AND OFF

Press the Display button (right side of the large 4-way switch) to turn the display off. Turning the display

off when it is not needed will save power and extend the useful life of the batteries. To turn the display

back on, press Display again.

TAKING A PICTURE

With the camera turned on, press the SNAP button to take a new photo. For best results, hold the

mageView steady using both hands. Lightly press down the SNAP button using the flat end of your

finger

, then release it. Avoid “punching” the SNAP button rapidly with a fingertip, resulting in shaky

photos.

You will hear two quick beeps to confirm a photo was taken, and briefly see a screen displaying

the remaining photo capacity (now one less), battery indicator, and resolution setting (1 or 3 stars).

REVIEWING AND DELETING STORED PICTURES

You may review previous images currently stored in the camera’s memory by either scrolling through

them one at a time, or seeing a “slide show” which automatically displays and changes images. To see

individual images, just press the UP (most

recent to oldest photo) or DOWN (oldest photo first)

buttons on the 4-way switch. If you see a photo you wish to delete, press SNAP. You will hear a rapid

11-1210 1LIM.indd 6 11/17/04 9:31:22 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell Imageview 111210 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell Imageview 111210 Manual

Product: