Manual Bushnell 70-0002 (page 6 of 33) (English, German, French, Italian, Portuguese, Spanish)

481961

Zoom out

Zoom in

1/33

To conserve energy the display in the Homing Mode will show 3

‘bars’ instead of the current bearing, and the segments will not be

displayed after 1minute. To activate the display again you must press

COMP. To exit the Homing Mode press MODE again to return to

default Compass Mode.

AUTO BACK LIGHT

Press the LIGHT button to turn on LCD backlight for 5 seconds.

Night Mode

Night Mode allows the backlight to come on automatically when any of the function keys are

pressed except when the compass is in Compass Mode. Press and hold down

LIGHT button for

3 seconds, and the Night Mode icon (represented by the light symbol) appears. To turn off press

and hold down

LIGHT button until the light symbol disappears.

BATTERY

Installing a Battery

To open the battery compartment cover, insert a coin in the coin slot

and rotate cover in a clockwise direction until it lifts open. Insert the

lithium cell (battery type: CR2430) into the compartment, making

sure that the negative polarity faces downwards. Close battery

compartment cover until it clicks shut.

Low Battery Indicator

A blinking battery icon will appear when the battery is low. The

battery compartment is on the back of the compass. Replace the

used battery with a CR2430 lithium battery. Note: The watch is

automatically reset when the battery is removed.

Battery Life

Your DNS is designed for continuous use and batteries will last over one year with regular usage.

Heavy use of the alarms, light, or compass will shorten battery life.

unsuccessful, the Cardinal Points will blink and you will have to repeat the previous 4 steps again.

To skip setting the declination, press the

ADJ button to return to the Compass Mode.

Declination Setting

Declination adjusts the compass for the local magnetic fields. In

some areas, magnetic declination can be considerable, so it is a good

idea to check for declination on your map or on the Internet. To

adjust the compass declination angle, go to Compass Mode and hold

down

ADJ button for 3 seconds, and the Compass Homing Mode

is displayed. Press

MODE button until you get into Declination

Setting Mode displayed as ‘DEC’. Press

UP or DOWN button for

desired value then just press

ADJ button to save settings and exit the

mode. Declination is sometimes measured as degrees positive and

negative. Degrees East are considered positive and Degrees West are

considered negative. For example, to change from 3 degrees East

(positive) declination to 3 degrees West (negative) press the

DOWN

button until 3W appears.

Self Homing Mode

Allows you to preset a reference bearing which tells the Compass to

alert you to the direction you should be heading. Go into Compass

Mode and press

MODE button to display compass Homing. To

adjust homing bearing, press and hold

ADJ button for three

seconds. Press

UP button or DOWN button to adjust to desired

bearing setting. Pressing

UP or DOWN will increase or decrease

bearing by increments of ten. A single push of

UP or DOWN moves

bearing by 1 degree. When done, press

ADJ to return to Homing

mode. To return to Compass Mode press

MODE button.

To operate the compass in Homing Mode go into the Compass Mode first, then press

MODE

button to get into Homing Mode.

The main reading displays the actual bearing and the lower reading shows the ‘home’ bearing. The

segments on the circumference show the difference between the two bearings, which can be used

to redirect you to stay on course.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bushnell 70-0002 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bushnell 70-0002 Manual

Product: