607777
34
Zoom out
Zoom in
Previous page
1/38
Next page
34
Configuring BURY Time Products
19. The Configuration menu item
In addition to the previously described menu items of Backup database, Restore database
and Connect to UNI CarTalk Time card, in the Configuration section you can find additional
menu items:
Device configuration
Under this menu item, it is possible to select and initialise the connected BURY Time products /
SD cards. Under FW Version, in the details which open, you are able to recognise the version
of the firmware which is installed on the selected product.
Every BURY Time product is equipped with a buzzer. In the sub-item of Volume Level, you are able
to set the intensity of the buzzer (only available for the CL 1010 Time).
Under Default mode, you set the mode which is to be active when you start the BURY Time product.
Here, the choice is between the tour types of “Private, “To work, “Business” or the “Last mode”.
For the BURY Time products that are equipped with light diodes, you are able to set either permanent
or one-off Mode signalling. If this is only displayed once, the LEDs switch off after approx. 10 sec-
onds. The LEDs only illuminate again in the event of a change to the tour type or the restarting
of the vehicle. You are able to extend the signalling phase to up to 60 seconds.
If you would like to be informed as to whether GPS signals are received at the beginning of the tour,
then you are able to activate the corresponding notification: enable sound if GPS fixed. At the same
time, you are also able to specify the time span as to from when you would like to be informed
if no GPS signal is received any more.
If you have enabled and installed the Danger zones function for the BURY Time product, then
the buzzer signalises those zones if you approach them. You are also able to deactivate the signal,
however, or change the acoustic tone of the signal.
The last piece of information tells you whether the danger zones are installed on the BURY Time prod-
uct and if yes, the date from which they originate.
Danger zones
If you click on this menu item, a separate window opens with a wizard who guides you through
the subsequent steps.
Important note:
Please comply with the country-specific laws and regulations if you want to use this function.X
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bury Time Suite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bury Time Suite in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bury Time Suite

Bury Time Suite User Manual - German - 38 pages

Bury Time Suite User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info