607782
34
Zoom out
Zoom in
Previous page
1/44
Next page
34
Operating guidelines
Audio
In this area you have the possibility to change the audio settings of the
HFCK.
The HFCK is sold with four Ringtones from which you can respectively
select one. With „NEXT“ or „PREVIOUS“ you can navigate in the list.
With „ACCEPT“ the ring tone is selected. If you would like to use your
mobile phone’s ring tone, please select the first entry in the menu.
Please remember, however, that not every mobile phone can transfer
its ring tone to the HFCK.
The volume level for the voice feedback and the selected ring tone can
be set in an additional sub menu. Available as voice commands are
LOUDER“, „LESS“, „MAXIMUM“, „MINIMUM“ and „ACCEPT“.
For some radios it may cause problems if the HFCK starts with voice
response immediately after the mute signal. Some radios need some
time for a corresponding activation and reaction to the mute signal.
This will be indicated to you through the fact that you don’t hear the
signal tone at the start of the voice control. To avoid this effect, you can
enter a maximum delay of up to three seconds in the MUTE DELAY
menu item. It is only after this time has elapsed that the HFCK begins
with the voice feedback.
Certain mobile telephones offer the possibility of being able to install
and operate a navigation solution. On many mobile phones, the sug-
gested directions are only transferred via the Bluetooth A2DP profile. If
you have not connected a suitable cable to the LINE-OUT output of the
HFCK and to the radio however, you are not able to hear these instruc-
tions.
With the External Audio menu item, it is possible to place these in-
structions on the PHONE-OUT output of the HFCK. This means that the
direction instructions are read out in monotone and the radio is also
muted. The HFCK takes priority with its functions, however, which
means that if the voice control is active or in the event of an incoming
call, any direction instructions that are being issued at that time will be
muted.
Please note:
If the function is activated it is not possible to listen to X
music via A2DP via the LINE-OUT output.
The “Balancecommand is used to compensate or adjust the volume
between the left and right side. “Installation” involves two options:
- Option 1 (all through the box):
Connection -
ISO-power connector plugged in, ISO-audio connector
connected (box active).
Phone call -
uses two front speakers and an internal amplifier in the
box. Car speakers are disconnected from the radio and connected to
the box (active). RadioMute line is also active and will turn off the radio
(Mute or switching to PHONE IN mode, depending on the radio).
Audio
Ringtones
Play
Select
Volume
Speech
Ringtone
Mute delay
External audio on
Balance
Installation
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bury CC 9068 App at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bury CC 9068 App in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bury CC 9068 App

Bury CC 9068 App User Manual - German - 2 pages

Bury CC 9068 App Quick start guide - Dutch - 2 pages

Bury CC 9068 App Quick start guide - French - 2 pages

Bury CC 9068 App Quick start guide - All languages - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info