607750
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
Operating guidelines
Outgoing call
Briefly press down on the call button to activate the voicetag function.
The device says: Enter voicetag. Begin the call with a voicetag. If the
number dialled is busy, you can begin to redial. To do so, hold down the
call button (for two seconds). The device says: Redial.
If you announce a non-saved voicetag then the device says: Voicetag
is not available. CC 9058 returns to standby mode.
Briefly press down on the end call button to end the voicetag function,
the active call or the redialling. If you make a call and briefly press
down on the call button, the private mode is then started. The call is
then forwarded to the mobile phone.
Incoming call
If a caller transmits its number, the device will read out this number:
05732xxxxx. If the caller has hidden their number, then the device
says: Unknown caller. Briefly press down on the end call button to
refuse the call. The device returns to standby mode. Briefly press down
on the call button to accept the incoming call.
Setting the volume
If you have coupled your telephone with the car kit, it is possible to set
the volume for each of the functions Speech, Music and Menu An-
nouncements separately. After you have set the volume and discon-
nected the telephone from the system, connect the telephone again,
and the selected volume will be stored. Press down the horizontal but-
tons to gradually increase or decrease the sound during an active con-
versation. A high signal tone sounds when the maximum volume has
been reached. A low signal tone sounds when the minimum volume has
been reached. But you can also go over the buttons with your fingers
(both directions).
Disconnecting a telephone
Hold down (for three seconds) the end call button to disconnect the
telephone. The device says: No telephone is connected.
Turning off CC 9058
When leaving the vehicle and turning off the engine, you should also
switch off the CC 9058.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bury CC 9058 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bury CC 9058 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bury CC 9058

Bury CC 9058 User Manual - German - 27 pages

Bury CC 9058 User Manual - Dutch - 26 pages

Bury CC 9058 Quick start guide - All languages - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info