607774
34
Zoom out
Zoom in
Previous page
1/34
Next page
3534
Operation instructions
Switch-on:
Establishinga Bluetooth connection (pairing):
If the power supply of the hands-free car kit (HFCK) is connected properly, the HFCK is
activated after having started the ignition. The display is switched on and a short high sound is
audible. After the initialisation mask, the main menu is displayed and another deep sound
appears if no mobile phone has been connected automatically to the HFCK via Bluetooth. In
case of a successfully established connection, a long high sound appears.
If you wish to establish a Bluetooth connection for the first time, you have to activate the
Bluetooth function of your mobile phone and search for Bluetooth devices. In this case, search
for a device labelled "CC 9050…“. If several devices were identified, please select the HFCK
and enter the PIN number 1234. The Bluetooth connection (pairing) will then be established
between your mobile phone and the HFCK. The HFCK supports the profiles "hands-free
operation" and "A2DP". Please set your mobile phone accordingly or check whether these
profiles are supported.
If it is not possible to establish a connection, please check and update the software release
(firmware) of your mobile phone or of the HFCK. You will find an overview dealing with this
subject on the Internet at www.bury.com. In addition it is possible that you must delete all
devices connected to your mobile phone first in order to enable a correct identification of the
HFCK and a connection can be established. If you have queries regarding the menu navigation,
functions and operation of your mobile phone, please refer to the operating guidelines of your
mobile phone. Depending on the manufacturer and type, this can differ considerably between
phones.
The HFCK has a memory for the storage of the identification of up to 10 mobile phones. In case
an eleventh mobile phone is connected, the oldest entry in the HFCK memory will be cancelled.
After the commissioning of the HFCK it automatically tries - "hands-free operation" profile - to
connect with a mobile telephone already saved.
12 3546
Disconnect a Bluetooth connection:
Menu navigation:
If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the
HFCK or at your mobile phone. In addition, the connection is disconnected, if you move too far
away from the vehicle while taking your mobile phone with you and thus leave the reception
radius of the HFCK.
Please note that the capacity of your mobile phone's storage battery can quickly decrease
when the Bluetooth function is active. If you do not want to use the Bluetooth function anymore,
e.g. if you leave the vehicle for a longer period, it is recommended to deactivate this function.
Please note that some of the functions/displays specified subsequently are only possible if they
are supported by the mobile phone!
The main menu is displayed after having switched on the HFCK. It informs you whether or not
your mobile telephone is connected via Bluetooth. Depending on the connection state, you can
call the main menu here by pressing key 5. The entry, marked with a bar can be selected by
again pressing key 5. The menu navigation can be interrupted with key 4.
- Language
-- English / German / Spanish (selection of the menu language)
- Service
-- Update (performing firmware updates of the hands-free car kit)
-- Colour
--- Primary colour (selection of the background colour)
---Text (selection of the text colour)
-- Software (reference to the current firmware version of the HFCK)
To install a firmware update you need a PC equipped with a Bluetooth interface (most suitably a
laptop). You can find up-to-date firmware versions and installation software for this HFCK on
the internet at www.bury.com
Functions while Bluetooth connection is inactive:
If no mobile telephone is connected, the notice 'disconnected' appears on the display.
(4) = Establishment of a connection with the mobile telephone connected last
(5) =Activation of the menu / calling up a menu item
(6) = Scrolling between the menu items
Other keys = no function
Functions while Bluetooth connection is active:
If a mobile telephone is connected to the HFCK, its BT identification name is displayed. The field
strength equally appears (the reception) as well as the capacity of the storage battery and the
volume level of the HFCK.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bury CC 9051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bury CC 9051 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bury CC 9051

Bury CC 9051 User Manual - English - 43 pages

Bury CC 9051 Additional guide - German - 1 pages

Bury CC 9051 User Manual - German, Dutch, French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info