38
Operating guidelines
39
Further Information
This menu enables you to connect the hands-free car kit to your mobi-
le telephone. Please select the function ‚connect‘. A small icon indicates
the profile the mobile telephone was connected to the HFCK last. A car
signalises the profile „hands-free“ and a grading key the profile „A2DP“.
If both symbols are displayed, you will be subsequently asked to select
the profile you want to connect the mobile telephone again.
Language
In the menu item Language you can change the menu language.
Therefore scroll to the required language and then press the selection
key. After a few seconds the new menu language is loaded.
Day/Night
As the lighting conditions vary according to the time of the day, you
have the possibility to reduce or increase the brightness under the
menu item Day / Night. This enables a better legibility of data on the
display.
Sleep Mode
In the menu item Sleep Mode you can activate a screen saver. It ap-
pears if you have not made any entry or pressed any key at the monitor
for 15 seconds. The display thereby darkens slowly until no contents
are visible, regardless if a mobile telephone is connected to the HFCK
or not. During an active phone call, the screen saver is deactivated.
Music
In case of an incoming call many mobile telephones transmit the proper
ring tone to the HFCK, but there are also exceptions. In this case, you
can configure a signal tone to be reproduced under the menu item
Music.
The following operation is possible:
Functions while Bluetooth connection is inactive:
If no mobile telephone is connected to the HFCK, the notice ‚disconnec-
ted‘ appears on the display.
(4) = Establishment of a connection with the mobile telephone connec
ted last, interrupt the menu navigation
(5) = Activation of the menu / calling up a menu item
(6) = Scrolling between the menu items, modification of the display
brightness (left / right) when menu inactive
Other keys = no function
Functions while Bluetooth connection is active – profile HF:
If a mobile telephone is connected to the HFCK, its BT identification
name is displayed. The field strength equally appears (the reception) as
well as the capacity of the storage battery, the name of the network
provider and the volume level of the HFCK.
(1) = calling of voice tags (voice tag function)
(2) = call list - previously dialled telephone numbers
(3) = interrupt Bluetooth connection
In order to be able to use the voice tag functions of your mobile te-
lephone with the HFCK, you must have marked the telephone numbers
in your mobile telephone accordingly beforehand. In most cases you
can only adopt voice tags for numbers memorised in the address book
of your mobile telephone.
Functions while Bluetooth connection is active - profile A2DP,
Play MP3:
If your mobile telephone possesses the Bluetooth profile A2DP, you can
play music (e.g. MP3 files) in stereo quality via the HFCK. It is important
to play the music title selected respectively on the HFCK via the func-
tion ‚play via...‘. As the menu navigation of the manufacturers of mobile
telephones differs considerably, the designation of the selection ‚...
Bluetooth-stereo-headset‘ may vary. If you establish this setting, the
music is played via the sound system connected to the HFCK.
(2) = start / stop the reproduction
(6) = change the title (left = back, right = forward),
volume adjustment (louder = top, lower = bottom)
ncoming call while playing MP3
If a call is received while music is played, the reproduction is interrup-
ted and the call is indicated graphically and acoustically. With key 1 you
can accept the call, with key 3 you can reject the call. After termination
of the call, the reproduction of music is continued. If your mobile tele-
phone does not automatically support this function, please restart the
reproduction of the music title at your mobile phone.
Display with English menu navigation
