719101
44
Zoom out
Zoom in
Previous page
1/48
Next page
44
CLEANING AFTER EACH USE
Close the lid and set all burners to "HI". Let the grill burn out for 15-30 minutes until no more smoke
rises from the grill. Close the valve on the gas cylinder and set all burners to the "OFF" position. Open
the grill and scrub the grids clean with a stainless steel brush.
Once the grill has cooled down, empty and clean the grease trap and tray.
Fire and explosion hazard
Do not use any fammable cleaning agents.
Remove the gas cylinder before cleaning the
gas grill.
Wait until the grill has cooled down completely
before cleaning.
Clean the grill after each use.
Remove the grease trap and dispose the grease
in an environmentally friendly manner.
Wipe the stainless-steel surfaces and grids
using a wet cloth or clean it with hot water.
If necessary, use a mild detergent. Rinse with
water and allow the gas grill to dry completely
before the next use. Next, polish the stain-
less-steel surfaces with a stainless-steel clea-
ning agent.
Use a brush to remove food particles from the
burners.
If in exceptional cases one of the nozzles is
blocked, use a jet needle to clean it.
If in exceptional cases the Venturi tube (gas-mi-
xing pipe) is blocked, use a needle or pipe
cleaner to clean it.
MAINTENANCE OF THE CAST IRON GRIDS
The grids are enameled. This ayer protects against rust and prevents food from sticking to the grids.
Despite this protective ayer, the grids can absorb and release grease and moisture. It is therefore advisa-
ble to let the grids burn-in as well.
BURNING
-
IN THE GRIDS
Cast iron grids must be given some time to burn in to protect the metal from rust and enable a non-
stick surface. The burn-in process of cast iron can be performed in 3 simple steps:
1. Clean the cast iron grids with warm soapy water, rinse well, and wipe dry.
2. Grease the grids completely. Use a fat with a high content of saturated fatty acids, e.g. coconut oil or ard.
3. Pace the grids on the grill and let them burn-in for 45 minutes at the highest temperature with the
lid closed. This burns the grease permanently onto the iron thus creating a protective patina.
MAINTENANCE OF THE STAINLESS STEEL GRIDS
Stainless steel grids do not need to be burned in. You can clean the durable grids with warm water, mild
detergent and a sponge by hand or in the dishwasher.
Stainless steel can slightly discolour when exposed to high temperatures. This is a natural process and
has no effect on the quality or your grilling result.
CLEANING THE GAS GRILL
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burnhard Fred at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burnhard Fred in the language / languages: English, German as an attachment in your email.

The manual is 15,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info