632514
7
Zoom out
Zoom in
Previous page
1/16
Next page
Using Your Stroller
1. Loop tether around handle bar center, slide strap end
through small loop on other end of strap and tighten
securely. PHOTO 9
2. Engage parking brake.
3. Place stroller wheel in “Stroll” position and secure by
tightening knob. PHOTO 10
4. Slide tow bar into left tow bar mount as far as it will go and
then close clamp firmly, making sure clamp latch is engaged.
PHOTO 11
NOTE: Retaining pin is not used for the “Stroll” position.
5. Push trailer to test stroller wheel tracking. If trailer does not
roll straight, adjust wheel tracking.
To view a video clip of “Convert from Trailering to
Strolling” go to: www.burley.com/support/tutorials.cfm.
Adjusting Stroller Wheel Tracking
NOTE: For best results, adjust with trailer fully loaded.
Tool Required: 5mm hex wrench (provided), 25mm (1) wrench
1. With stroller wheel secured in “Stroll” position, loosen bolt
using 5mm hex wrench. FIGURE 3
2. Using a 25mm wrench, turn bushing so that stroller wheel is
vertical when viewed from front.
3. Fine tune as necessary so that trailer rolls straight.
4. Tighten bolt.
To view a video clip of “Adjusting Stroller Tracking” go to:
www.burley.com/support/tutorials.cfm.
Tow Bar
Clamp
PHOTO 9
PHOTO 11: Tow bar in “Stroll position
Tow Bar
Mount
Tow Bar
PHOTO 10: Stroller wheel in “Stroll” position
Knob
THIS PRODUCT WAS DESIGNED FOR USE ON SURFACES THAT ARE
MEANT FOR WALKING. DO NOT USE IT ON STAIRS, ESCALATORS
OR OTHER UNEVEN SURFACES. NEVER USE IT WITH INLINE OR
ROLLER SKATES. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN
CAUSE AN ACCIDENT RESULTING IN SERIOUS INJURY.
WARNING
WHEN CONVERTING THIS ATTACHMENT FROM STROLLING TO
BIKING, MAKE SURE THAT STROLLER WHEEL IS IN PROPER
POSITION BEFORE ATTACHING TRAILER TO YOUR BICYCLE.
WARNING
FIGURE 3: To adjust stroller wheel tracking
Bushing
Bolt
B U R L E Y D L I T E S T A N D S O LO S T O W N E R S I N S T R U C T I O N A N D S A F E T Y M A N U A L 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Solo ST 2009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Solo ST 2009 in the language / languages: English as an attachment in your email.

The manual is 5,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info