632445
16
Zoom out
Zoom in
Previous page
1/26
Next page
Adjusting the Suspension
1. There are 5 marked adjustment set points
(Figure 14). Rotate adjustment knob to set
suspension. Top position for lightest loads,
bottom position for heaviest loads. Trailer
should be used with left and right suspension
set the same.
Attaching the Wheels
1. Push in the rubber button on the outside of
the wheel hub (Figure 15).
2. Insert wheel axle into axle receiver, and then
release the button. Pull firmly on wheel to
confirm the axle is fully engaged.
Figure 14
Figure 15
Réglage de la suspension
1. Il y a 5 points de réglage marqués (Figure 14).
Tournez le bouton de réglage pour définir la
suspension : position haute pour les charges
les plus légères, position basse pour les
charges les plus lourdes. La remorque doit
être utilisée avec les mêmes réglages pour
les suspensions gauche et droite.
Fixation des roues
1. Appuyez sur le bouton en caoutchouc situé à
l’extérieur du moyeu de roue (Figure 15).
2. Insérez l’axe de roue dans le récepteur d’axe,
puis relâchez le bouton. Tirez fermement
sur la roue pour confirmer que l’axe est
entièrement engagé.
Ajuste de la suspensión
1. Hay 5 puntos de posición de ajuste marcados
(figura 14). Gire la perilla de ajuste para
posicionar la suspensión. La posición superior
es para las cargas más ligeras y la posición
inferior es para las más pesadas. El remolque
debe utilizarse con las suspensiones derecha
e izquierda en la misma posición.
Colocación de las ruedas
1. Presione el botón de goma del exterior del
cojinete de la rueda (figura 15).
2. Inserte el eje de la rueda en el receptor del
eje y luego suelte el botón. Tire fuertemente
de la rueda para asegurarse de que el eje esté
sujeto completamente.
Einstellen der Federung
1. Es gibt fünf gekennzeichnete Einstellpunkte
(Abbildung 14). Drehen Sie den Einstellknopf,
um die Federung einzustellen. Obere Stellung
für leichteste Ladungen, untere Stellung für
schwerste Ladungen. Der Anhänger ist nur zu
benutzen, wenn die linke und rechte Federung
gleich eingestellt sind.
Befestigung der Räder
1. Den Gummiknopf an der Außenseite der Radnabe
drücken (Abbildung 15).
2. Schieben Sie die Radachse in die Achsenhalterung
und lassen Sie den Knopf anschließend los. Ziehen
Sie fest an dem Rad, um sich zu vergewissern,
dass die Achse vollständig eingerastet ist.
CHILD TRAILER MANUAL 13
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Solo 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Solo 2014 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info