632518

Burley Solo 2013 Manual

14
Zoom out
Zoom in
Previous page
1/26
Next page
Installing the Tow Bar
For trailers with plastic tow bar mounts
1. Squeeze buttons (7a) on top and bottom of wheelguard to open (Figure 7).
2. Slide tow bar into receiver on left side of trailer (Figure 8) until holes (8a)
and (8b) are aligned.
3. Insert the safety pin from the top through the aligned holes [Figure 9] and
close the wheelguard until it clicks.
4. The towbar is now secured by both the safety pin and the locked wheelguard
[Figure 10].
5. Always make sure the safety pin has locked securely as shown on the left
[Figure 11].
Installation de la barre
de remorquage
Pour les remorques dont les montants de la barre de remorquage sont en
plastique
1. Appuyez sur les boutons du haut (7a) et sur le garde-roue pour ouvrir le
mécanisme (Figure 7).
2. Faites glisser la barre de remorquage dans le réceptacle sur la gauche de
la remorque (Figure 8) jusqu’à ce que les orifices (8a) et (8b) soient alignés.
3. Insérez la broche de sécurité depuis le haut en passant par les orifices
alignés (Figure 9) et fermez le garde-roue de manière à ce qu’il émette un «
clic ».
4. La barre de remorquage est à présent sécurisée par la broche de sécurité et
le garde-roue verrouillé (Figure 10).
5. Assurez-vous que la broche de sécurité soit bien verrouillée, comme indiqué
sur la gauche (Figure 11).
Instalación de la barra de remolque
Para remolques con montura de barra de remolque de plástico
1. Presione los botones (7a) en la parte superior e inferior del guardabarros
para abrirlo (Figura 7).
2. Deslice la barra de remolque en el receptor del lado izquierdo del
remolque (Figura 8) hasta que los agujeros (8a) y (8b) queden alineados.
3. Inserte el pasador de seguridad desde la parte superior a través de los
agujeros alineados [Figura 9] y cierre el guardabarros hasta que haga clic.
4. La barra de remolque queda ahora fijada mediante el pasador de
seguridad y el guardabarros bloqueado [Figura 10].
5. Asegúrese siempre de que el pasador de seguridad se haya fijado de
forma segura como se muestra a la izquierda [Figura 11].
Montage der Deichsel
Für Anhänger mit Deichselbefestigungen aus Kunststoff
1. Zum Öffnen die Knöpfe (7a) oben und unten an der Schutzkappe
gedrückt halten (Abb. 7).
2. Die Deichsel in die Deichselaufnahme auf der linken Seite des
Anhängers (Abb. 8) einführen, sodass die Bohrungen (8a) und (8b)
aufeinander ausgerichtet sind.
3. Den Sicherheitsbolzen von oben durch die aufeinander ausgerichteten
Bohrungen [Abb. 9] schieben und die Schutzkappe schließen und
einrasten lassen.
4. Jetzt ist die Deichsel sowohl durch den Sicherheitsbolzen als auch die
verschlossene Schutzkappe gesichert [Abb. 10].
5. Bitte überprüfen Sie immer, ob der Sicherheitsbolzen fest sitzt, wie
auf der Abbildung links dargestellt [Abb. 11].
CHILD TRAILER MANUAL 11
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Solo 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Solo 2013 in the language / languages: English as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info