Manual Burley Piccolo (page 13 of 20) (English, German, French, Spanish)

772381

Zoom out

Zoom in

1/20

OWNER’S INSTRUCTION & SAFETY MANUAL 11

BURLEY.COM

Detaching the Trailercycle from your Bicycle:

1. Rotate knob counterclockwise until the knob is full disengaged with the rack

2. Slide lever to retract safety pins

3. While retracting the safety pins lift hitch off of rack.

Disassembly for longer term storage:

1. Remove flag from flag holder

2. Remove stem face plate, remove handlebar and replace faceplate and bolts.

3. Loosen tow bar clamp bolts until the tow bar is able to move slightly.

4. Depress the spring detent and slide the tow arm out of the frame of the trailer

cycle.

Trennen des Anhängerfahrrads von Ihrem

Fahrrad:

1. Den Knopf gegen den Uhrzeigersinn drehen, bis sich der Knopf ganz vom

Gepäckträger gelöst hat.

2. Am Hebel ziehen, um die Sicherheitsstifte zurückzuziehen

3. Mit zurückgezogenen Sicherheitsstiften die Kupplung vom Gepäckträger heben.

Demontage zur längeren Aufbewahrung:

1. Fahne aus dem Fahnenhalter nehmen

2. Auflageplatte abmontieren, Lenker abmontieren und Auflageplatte und Schrauben

wieder anbringen.

3. Die Klemmschrauben an der Zugstange losdrehen, bis sich die Zugstange etwas

bewegen lässt.

4. Die Federraste nach unten drücken und den Zugarm aus dem Rahmen des

Anhängerfahrrads ziehen.

Désarrimage du semi-vélo :

1. Faites tourner le bouton d’ajustement dans le sens des aiguilles d’une montre

jusqu’à ce qu’il se désengage totalement du support.

2. Faites glisser le levier de sorte à rétracter les broches de sécurité.

3. Tout en maintenant les broches de sécurité rétractées, soulevez l’attelage du

support.

Désassemblage en vue d’un stockage prolongé :

1. Ôtez le drapeau du porte-drapeau.

2. Ôtez la plaque frontale de la potence, puis ôtez le guidon et replacez la plaque

frontale et les boulons.

3. Desserrez les boulons de la barre de remorquage jusqu’à ce qu’elle puisse

légèrement bouger.

4. Appuyez sur le ressort et sortez le bras de remorquage du cadre du semi-vélo en

le faisant glisser.

Cómo quitar el remolque para bicicleta de la

bicicleta:

1. Gire la perilla hacia la izquierda hasta que se suelte por completo del bastidor

2. Deslice la palanca para retirar los pasadores de seguridad

3. Mientras retira los pasadores de seguridad, saque el enganche del bastidor.

Desmontaje para almacenamientos prolongados:

1. Quite la bandera de su soporte

2. Retire la placa frontal de la potencia, quite el manillar y sustituya la placa frontal y

los pernos.

3. Afloje los pernos de sujeción de la abrazadera de la barra de arrastre hasta que

esta última pueda moverse ligeramente.

4. Presione el retén del muelle y deslice el brazo de arrastre para sacarlo del cuadro

del remolque de bicicleta.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Piccolo in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Piccolo Manual

Product: