632555

Burley Piccolo 2010-2014 Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
Trailercycle Assembly:
1. Insert tow bar into frame coupling and align so
that detent engages in detent hole on frame
as shown. Progressively tighten clamp bolts,
alternating between bolts every 1-2 N·m until
both bolts are at 6-8 N·m (4-6 ft-lb).
2. Mount pedals (stamped R for right and L for
left) to the corresponding crank arm and
tighten. Left pedal uses left hand threads
( counter-clockwise to tighten).
3. Remove stem face plate, place handlebar into
clamp and replace face plate.
Center handlebar and tighten face plate bolts to
4-5 N·m (3-3.7 ft-lb).
4. Insert flag into flagholder (inside left dropout).
3
Montage du demi-tandem :
1. Insérez la barre de remorquage dans le couplage du
cadre et alignez-les de manière à ce que le cliquet
s’enclenche dans son trou sur le cadre, comme sur
l’illustration. Serrez progressivement les boulons
du collier, en alternant entre les boulons tous les
1-2 N-m jusqu’à ce qu’ils atteignent 6-8 N-m (4-6 ft-lb).
2. Montez les pédales (marquées R pour droite et L pour
gauche) sur le bras de manivelle correspondant et
serrez-les. La pédale de gauche utilise les filetages à
gauche (sens anti-horaire pour visser).
3. Retirez la bride plate de la tige, placez le guidon dans
le collier et replacez la bride plate.
Centrez le guidon et serrez les boulons de la bride
plate à 4-5 N-m (3-3,7 ft-lb).
4. Insérez le fanion dans le porte-fanion (à l’intérieur de
la patte de dérailleur gauche).
Montaje de la bicicleta remolcada:
1. Inserte la barra de remolque en el acoplamiento del
marco y alinéelo de modo que el trinquete se enganche
en el orificio del trinquete del marco tal como se
muestra. Apriete progresivamente los tornillos de las
abrazaderas, alternando entre los tornillos cada
1-2 Nm hasta que ambos tornillos estén a 6-8 Nm.
2. Monte los pedales (estampados con las letras R para el
derecho y L para el izquierdo) en el lado correspondiente
de la manivela y apriételos. La rosca del pedal izquierdo
está orientada hacia la izquierda (gire en el sentido
contrario a las agujas del reloj para apretar).
3. Retire la placa frontal del eje, coloque el manillar en la
abrazadera y vuelva a poner la placa frontal en su lugar.
Centre el manillar y apriete los tornillos de la placa
frontal a 4-5 Nm.
4. Inserte la bandera en el soporte de la bandera
(patilla interior izquierda).
Zusammenbau des Trailerbikes:
1. Die Zugstange in die Rahmenverbindung einführen
und so ausrichten, dass der Sicherungsknopf
in das Loch im Rahmen einrastet, wie in der
Abbildung dargestellt. Die Befestigungsschrauben
schrittweise festziehen, dabei alle 1-2 Nm zwischen
den Schrauben hin und her wechseln, bis beide
Schrauben mit 6-8 Nm festgezogen sind.
2. Pedale (aufgedrucktes R für rechts und L für links)
an die entsprechenden Kurbelarme anbringen und
festziehen. Beim linken Pedal wird ein Linksgewinde
verwendet (Festziehen entgegen dem Uhrzeigersinn).
3. Aheadkappe vom Vorbau abnehmen, Lenker
in die Klemmung einsetzen und Aheadkappe
wieder aufsetzen.
Lenker zentrieren und Schrauben der Aheadkappe
mit 4-5 Nm festziehen.
4. Sicherheitswimpel in die Wimpelhalterung einsetzen
(im linken Ausfallende).
1
Detent engaged
in frame hole
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Piccolo 2010-2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Piccolo 2010-2014 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info