632533
7
Zoom out
Zoom in
Previous page
1/12
Next page
BURLEY NOMAD AND FLATBED OWNER’S INSTRUCTION AND SAFETY MANUAL 7
Quick
Release
Lever
Flex
Connector
Hitch
WARNING
NEVER OPERATE TRAILER WITHOUT RETAINING PIN LOCKED
IN PLACE. AN UNLOCKED TOW BAR CAN LOOSEN OR DETACH,
CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.
Installing Safety Flag
Nomad:
Join flag pole sections together and insert end into flag pocket on
outside of left side panel.
WARNING
DO NOT USE TRAILER WITHOUT SAFETY FLAG.
Hitching Trailer to Your Bicycle
1. Remove rear quick release lever assembly from bike.
2. Match hole on flat side of hitch upper arm to left (non-
chain ring side) rear dropout hole.
3. Loosely reassemble quick release assembly through
hitch, dropout and wheel. FIGURE 4
4. Slide flex connector between hitch side arms, and match
holes. Racks, bags, or fittings should not interfere with
hitch.
5. Open retaining pin and insert through hitch and flex
connector holes. Rotate and close retaining hoop.
6. Tighten and close quick release lever, with lever pointing
to rear of bike. A properly adjusted quick release lever
should leave an imprint on your palm when the lever is
rotated to the closed position.
7. Wrap safety strap twice around inside of chain stay.
Fasten hook to D-ring on underside of tow bar
end. FIGURE 5
8. To remove trailer from bicycle, unfasten clip from D-ring
and remove retaining pin.
WARNING
QUICK RELEASE LEVER MUST BE IN CLOSED POSITION AND
HITCH SAFETY STRAP PROPERLY INSTALLED. HITCH MUST NOT
INTERFERE WITH RACKS, BAGS OR FITTINGS. INSPECT HITCH
AND TOW BAR FREQUENTLY FOR DAMAGE OR LOOSE FASTEN-
ERS. DAMAGED, IMPROPERLY INSTALLED OR INTERFERING
PARTS CAN CAUSE ACCIDENTS RESULTING IN SERIOUS INJURY.
PHOTO 9: FLATBED TOW BAR INSTALLATION
Trailer Front
Retaining Pin
Tow Bar Mounts
Quick
Release
Nut
Hitch
FIGURE 4
Hook fastened to
D-ring under tow bar
Retaining Pin
Safety strap
wrapped twice
around chainstay
FIGURE 5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Nomad 2009-2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Nomad 2009-2013 in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info