632534
8
Zoom out
Zoom in
Previous page
1/18
Next page
8 B U R L E Y T R A I L E R O W N E R ’S I N S TR U C T I O N A N D S A FE T Y M A N UA L
All four side panel hold-downs must be snapped in place before using the
trailer. Otherwise, the side rails can shift or collapse, resulting in the loss of cargo.
WARNING
Installing the Tailgate and Splashguard
Nomad
: Thread the rear tie-down straps through the inner and then outer slots
of the male buckle sections of the rear side release buckles, which are
attached to the female buckle sec-
tions on the inside rear of the side
panels. Allow enough slack so you
can loop the webbing straps over
the rear of the side panels. To attach
the front splashguard to the front
of the side panels, repeat this step
using the front tie-down straps and
the front side release buckles. To ac-
commodate dierent sizes of cargo,
tighten or loosen the webbing straps
as required (see illustration).
Installing the Roll Bar
and Cover
Nomad
: Place the cover, right side
out, over the side rails with the “Nomad” logo at the front of the trailer. Slip
a roll bar knob through one of the grommets on the cover. Slide the roll bar
through the casing in the top of the
mesh divider. Align one end of the roll
bar with its corresponding hole on
the side rail. Thread the roll bar knob
through one side rail, and tighten
it into the roll bar (see illustration).
Repeat this step for the roll bar knob
on the other side. Pull the B-tabs down
and loop the rubber O-rings over the
trailer frame. Make sure the cover
extends over the top of each side
panel.
B-tab
Tailgate
Splashguard
Trailer Frame
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Nomad 2008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Nomad 2008 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info