632550

Burley My Kick Manual

6
Zoom out
Zoom in
Previous page
1/13
Next page
MYKICK 3
Assembly:
Your MyKick is fully assembled right out of the box.
A couple quick adjustments are necessary before it
can be used.
1. Straighten handlebar perpendicular to front
wheel. Tighten with provided 5mm hex wrench
(Figure 1). Verify handlebar is secure enough to
prevent any rotation relative to front wheel.
2. Adjust seat post into frame tube. Align to desired
height and tighten QR lever. Tightening QR
lever (Figure 2)– verify seat is secure enough to
prevent any rotation relative to frame.
Closed
Open
Adjustment nut
Figure 2
Figure 1
Montage:
Ihr MyKick wird komplett montiert geliefert. Es
müssen nur ein paar Anpassungen vorgenommen
werden, bevor Sie losfahren können.
1. Lenker senkrecht zum Vorderrad ausrichten.
Mit dem mitgelieferten 5-mm-Inbusschlüssel
festziehen (Abb. 1). Prüfen, ob der Lenker fest
genug angezogen wurde, sodass sich seine
senkrechte Position im Verhältnis zum Rad
nicht verstellen kann.
2. Sattelstütze in das Rahmenrohr einpassen.
Auf die gewünschte Höhe ausrichten und
Schnellspannhebel festziehen. Festziehen des
Schnellspannhebels (Abb. 2) – sicherstellen, dass
der Sattel sicher befestigt ist und sich im Verhältnis
zum Rahmen nicht verstellen kann.
Montage :
Votre vélo MyKick est fourni entièrement monté.
Toutefois, quelques réglages rapides sont
nécessaires avant de pouvoir l’utiliser.
1. Redressez le guidon perpendiculairement à la
roue avant. Serrez à l’aide de la clé hexagonale
de 5 mm fournie (Figure 1). Vérifiez si le guidon
est bien fixé pour empêcher toute rotation par
rapport à la roue avant.
2. Réglez la tige de selle dans le tube du cadre.
Alignez avec la hauteur souhaitée et serrez le
levier à blocage rapide. En serrant le levier à
blocage rapide (Figure 2), vérifiez si la selle est
bien fixée pour empêcher toute rotation par
rapport au cadre.
Montaje:
Su MyKick se monta completamente una vez que
lo saque fuera de la caja. Son necesarios un par de
ajustes rápidos antes de usarla.
1. Enderece el manillar perpendicular a la rueda
delantera. Apriételo con la llave hexagonal de 5 mm
proporcionada (Figura 1). Verifique que el manillar
esté lo suficientemente seguro para evitar que se
gire en relación con la rueda delantera.
2. Ajuste la tija del sillín en el tubo de la estructura.
Alinéelo a la altura deseada y apriete la palanca
de cierre rápido. Cuando apriete la palanca de
cierre rápido (Figura 2) – compruebe que el sillín
esté bien asegurado para evitar que se gire en
relación con la estructura.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley My Kick at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley My Kick in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info