632457
9
Zoom out
Zoom in
Previous page
1/15
Next page
16 B U R L E Y T R A I L E R O W N E R S I N S T R U C T I O N A N D S A F E T Y M A N U A L
B U R L E Y T R A I L E R O W N E R S I N S T R U C T I O N A N D S A F E T Y M A N U A L 17
Padded Seat & Shoulder Harness, Child Seat
Recliner, and Recessed Helmet Pocket
(d’Lite
, Solo
, Lady Bug
, Cub
)
To Install Seat Pad:
Attach the seat pad Velcro hook strips to the loop Velcro strips on the seat.
To Install Shoulder Harness Pad:
Insert the shoulder straps into the shoulder harness pad as shown in the
drawing at the right. The shoulder straps should
be oriented so that the FLAT parts of the male
buckles are facing toward each other.
Using the Child Seat Recliner
The child seat can be reclined for
added comfort by making the following
adjustments:
1. Loosen the tension on the straps (A)
attached to the top of the frame.
2. Loosen the tension in the helmet
pocket straps (B).
Using the Recessed
Helmet Pocket
(d’Lite
, Solo
, Lady Bug
, Cub
)
The helmet pocket, which is designed
to provide added room for the back
side of a child’s helmet, can be
modified by loosening/tightening the
helmet pocket straps (B)
as required.
Using the Child Seat Divider
(d’Lite
, Lady Bug
only)
This feature keeps two passengers from sliding to the center of the seat.
Connect center crotch strap O-ring to snap hook located on the front splash
guard. Adjust strap tension with the plastic slider on the crotch strap.
NOTE: Use the Seat Divider feature only when transporting two passengers.
Using the Seat Harness
Only passengers who are able to wear a helmet and sit
upright, unassisted should ride in a child trailer. Adequate neck strength
is required by passengers to hold their heads upright while trailering. A
physician should evaluate anyone who is of questionable developmental
age for trailering.
IMPORTANT:
Single Passenger, Solo
:
1. Make sure the seat pad and shoulder harness are
installed as indicated in the previous section.
2. Position the child in the center of the seat.
3. Snap shoulder straps into the Y-buckle, with the
buckle positioned at the child’s sternum.
4. Make sure the shoulder straps are adjusted so that
the child cannot move too far forward in the seat.
5. Fasten and adjust the lap belt so that it is snug.
Single Passenger, All Other Models:
1. Unclip the center support strap (with O-ring).
2. Remove both shoulder harnesses (if applicable) from the shoulder
straps. Unclip the Y-buckle if necessary. Store one of the shoulder
harnesses in a safe place. Leave outboard shoulder straps dangling.
3. Remove the two center shoulder straps by unthreading them from the
ladder locks.
4. Trade the position of the shoulder straps and re-insert the straps into
the ladder locks as shown in the illustration to
the right. The flat parts of the male portion of
the Y-buckle should face toward the center.
5. Install one shoulder harness assembly in the
center position as shown at above left.
6. Seat the child in the center of the seat.
7. Snap shoulder straps into the Y-buckle, with the
buckle positioned at the child’s sternum.
8. Make sure the shoulder straps are adjusted so
that the child cannot move too far forward in the seat.
9. Fasten and adjust the lap belt so that it is snug.
B
A
Ladder Lock
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Lady Bug 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Lady Bug 2007 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info