Manual Burley Honey Bee (page 6 of 40) (English, German, French, Spanish)

772368

Zoom out

Zoom in

1/40

CHILD TRAILER

6ENG

Figure 8 Figure 9

Figure 10

Figure 11

Figure 7

Installing the Wheel Guards

1. Insert wheel guard bolts through frame tube. Match holes

in wheel guards to bolts. Tighten securely with hex key

(Figure 7).

2. Repeat for wheel guard on other side of trailer.

Installing the Tow Bar

1. Slide the tow bar into the tow bar receivers until hole A is aligned with hole B (Figure 8). The red

safety collar must be flush with the front of the tow bar receiver, which indicates that the tow bar

has been fully inserted.

2. Insert the retaining pin from the top through the aligned holes (Figure 9).

3. Make sure the retaining pin has locked properly as shown (Figure 10).

4. Clip the safety strap to the D-ring on the trailer frame (Figure 11).

Removing the Tow Bar

1. Remove the retaining pin, and unclip the safety strap

2. Press the tab on the wheel guard to depress the detent, and remove the tow bar.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Honey Bee in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 14.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Honey Bee Manual

Product: