632535
6
Zoom out
Zoom in
Previous page
1/18
Next page
6 B U R L E Y T R A I L E R O W N E R ’S I N S TR U C T I O N A N D S A FE T Y M A N UA L
Mounting the Reectors
Nomad
: The reector brackets mount on the outside rear of each side
panel, 2.5” up from the plastic connector on the side panel. (The holes
for the mounting screws are covered by the fabric.)
To mount the bracket, insert a self-tapping bracket
screw through the hole in the curved section of the
reector and drive the screw through the fabric,
into the hole in the rear side panel frame. (This
does not harm the fabric.) Then mount the reector
onto the bracket with the reector screw. Repeat for
the bracket and reector on the other side panel.
See illustrations.
Flatbed
: The reectors are mounted to the reector
brackets on the rear of the main frame tube. Snap
the posts on the reectors into the openings in the
brackets, and with the provided screws, screw the
pieces together. Tighten the screws snugly, making
sure the reector faces away from the trailer.
Attaching the Wheels
First, verify that the tires are inated to 30-35 P.S.I.
Tip the trailer frame onto its rear end.
Nomad
: With the quick-release lever in the OPEN” position, insert the wheel
axle assembly completely into the hollow trailer axle, making sure that the
horizontal shaft goes all the way into the axle. Once the wheel is fully seated
in the hollow axle, position the quick-release lever so that it is aimed to the
rear of the trailer in the “CLOSED” position (the lever is marked for OPEN or
CLOSED positions). Repeat
for the other wheel.
2.5”
Right
rear
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Flatbed 2008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Flatbed 2008 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info