772383

Burley Encore 2019 Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
OWNER’S INSTRUCTION & SAFETY MANUAL16 BURLEY.COM
Adjusting the Roll Bar
1. Tow mode: Always rotate the roll bar forward
when trailer is in towing mode (Figure 21A).
2. Stroll / Jog mode: The roll bar* may be
rotated to serve as a handlebar while trailer is
in strolling or jogging mode (Figure 21B). Pull
lever to rotate (Figure 22).
*The roll bar lever tension is optimally adjusted from the
factory. If the roll bar slips when lifting up or pushing down
– or if it makes excessive noise when rotating – the lever
tension can be fine-tuned by releasing the lever, squeezing
the outer bar mounts together and turning the barrel nut on
the side opposite the lever.
Figure 21
Réglage de l’arceau de sécurité
1. Mode remorquage : Tournez toujours l’arceau
de sécurité vers l’avant lorsque la remorque
est en mode remorquage (Figure 21A).
2. Mode promenade : l’arceau de sécurité* peut
être tourné pour servir de guidon lorsque la
remorque est en mode promenade (Figure
21B). Tirez le levier pour tourner (Figure 22).
*La tension du levier de l’arceau de sécurité est réglée de
manière optimale en usine. Si l’arceau de sécurité glisse
lorsque vous le levez ou l’abaissez, ou s’il fait un bruit excessif
lorsque vous le tournez, la tension du levier peut être réglée
en relâchant le levier, en appuyant sur les supports de la
barre extérieure et en tournant l’écrou à portée cylindrique
sur le côté opposé du levier.
Ajuste de la barra de soporte
1. Modo de remolque: gire siempre la barra de
soporte hacia adelante cuando el remolque se
encuentre en modo de remolque (Figura 21A).
2. Modo de paseo / trote: la barra de soporte*
puede girarse para servir como manillar
mientras el remolque se encuentre en modo de
paseo o trote (Figura 21B). Tire de la palanca
para girar (Figura 22).
*La tensión de la barra de soporte viene ajustada
perfectamente de fábrica. Si la barra de soporte se desliza al
levantar o presionar hacia abajo, o si hace demasiado ruido
al girar, la tensión de la palanca puede ajustarse liberando
la palanca, apretando los montajes externos de la barra
uno contra el otro y girando la tuerca de seguridad del lado
opuesto de la palanca.
Einstellen des Überrollbügels
1. Zugmodus: Immer den Überrollbügel nach
vorne drehen , wenn Trailer ist in Schleppbetrieb
(Abbildung 21A).
2. Schiebe-/Laufmodus: Der Überrollbügel* kann
umgedreht und als Griffstange genutzt werden,
wenn der Anhänger geschoben wird (Abbildung
21B). Ziehen Sie den Hebel, um die Griffstange zu
drehen (Abbildung 22).
*Die Hebelspannung des Überrollbügels ist von Werk aus
optimal eingestellt. Sollte der Überrollbügel beim Anheben
oder Senken abfallen - oder sollte er beim Drehen übermäßige
Geräusche machen - dann kann eine Feineinstellung der
Hebelspannung vorgenommen werden, indem Sie den Hebel
entriegeln, die äußere Stangenhalterungen zusammendrücken
und die Zylindermutter auf der dem Hebel entgegengesetzten
Seite drehen.
Figure 22
A
B
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Encore 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Encore 2019 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info