772377
21
Zoom out
Zoom in
Previous page
1/84
Next page
OWNER’S INSTRUCTION & SAFETY MANUAL 21BURLEY.COM ENG
Removing the Bicycle Seat from Your Bicycle
1. Detach the Safety Strap by releasing the buckle.
2. Remove the Mounting Rails from the Mounting Block by depressing the front face of the
mounting block [Figure 37a] and pulling the Mounting Rails out of the Mounting Block [Figure
37b].
NOTE: It is easiest to remove the Mounting Rails from the Mounting Block if you grab the front
of the Bicycle Seat between the legs (where the Mounting Rails pass through the Bicycle Seat).
Removing the Frame Mounting Assembly from Your Bicycle
1. Remove the Mounting Plate from the Mounting Block by using the provided Hex Wrench to
remove the 4 screws, while being careful not to lose the lock washers.
2. Remove the Mounting Block from the bicycle frame.
Removing the Mounting Rails from Your Bicycle Seat
1a. Dash FM: Remove the Mounting Knob by pulling the Locking Ring towards the Mounting Knob
[Figure 38a], and rotating the Mounting Knob counter-clockwise [Figure 38b].
1b. Dash X FM: Remove the bolt by using the included Hex Wrench to rotate it counter-clockwise
[Figure 39].
2. Rotate the Base Plate away from the seat [Figure 40a] and then slide the Mounting Rails out
through the 2 holes between the legs of the Bicycle Seat [Figure 40b].
Figure 37 Figure 38
Figure 40
A
B
A
A B
Figure 39
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Dash FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Dash FM in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info