Manual Burley D-Lite X (page 6 of 40) (English, German, French, Spanish)

772366

Zoom out

Zoom in

1/40

CHILD TRAILER

6ENG

Installing the Quick Receivers

1. Position the Quick Receiver as shown (Figure 8).

2. Slide the Quick Receiver over the aluminum receiver mounts

until fully seated (Figure 8).

3. Insert the yellow sleeve into the Quick Receiver, with the

arrows pointed up, until it is flush with the Quick Receiver

(Figure 9).

4. Repeat on the opposite side.

Note: The underside of the Quick Receivers are marked with “R”

for Right and “L” for Left to denote which side they should be

used on.

Note: If you need to remove the Quick Receivers, insert a flat,

thin item (such as a key or flathead screwdriver) into the front

section of the forward slot on the underside of the receiver to

depress the retaining tab (Figure 10). After the retaining tab has

been depressed, slide the yellow insert sleeve out of the Quick

Receiver by pushing it from the rear.

Figure 8 Figure 9

Figure 10

Installing the Tow Bar

1. Slide the tow bar into the Quick Receiver until the primary

retaining pin engages with the tow bar (Figure 11).

- While inserting the tow bar, you should see the release

handle move outward and then return to its original position.

The tow bar is not secure until the release handle has

returned to its original position (Figure 12).

3. Pull on the tow bar to ensure that it is securely attached to

the Quick Receiver.

4. Depress the button on top of the secondary retaining pin and

insert it into the aligned holes through the Quick Receiver and

tow bar (Figure 13).

Removing the Tow Bar

1. Depress button and remove the secondary retaining pin.

2. Pull the Quick Receiver release handle and remove the tow

bar.

Figure 11

Figure 13

Figure 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley D-Lite X in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 15.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley D-Lite X Manual

Product: