772384
17
Zoom out
Zoom in
Previous page
1/24
Next page
OWNER’S INSTRUCTION & SAFETY MANUAL14 BURLEY.COM
Hooking up Your Trailer
1. Quick Release or Nutted Axle: Remove quick-
release skewer or nut from the left side of
bike’s rear wheel axle. Install hitch between
quick-release or nut and frame (Figure 17).
Tighten the quick-release or nut following
manufacturer’s recommendation. The
hitch can remain on the bike when trailer is
removed. Consult Burley.com for accessories
designed to help fit your trailer to your bike
Thru Axle: Consult Burley.com to obtain
proper fit and installation to your bike.
2. Hooking the tow bar to the hitch: Insert flex
connector in between the two holes on the
hitch. Insert retaining pin and close retainer.
Wrap safety strap around the frame of the
bike (twice if possible) and latch to the D-ring
on the tow bar (Figure 18).
Figure 17
Figure 18
Accrochage de votre remorque
1. Installation de l’attelage sur votre vélo : Retirez le levier de
blocage rapide ou l’écrou du côté gauche de l’axe de la roue
arrière du vélo. Installez l’attelage entre le levier de blocage
rapide ou l’écrou et le cadre (Figure 17). Serrez le levier de
blocage rapide ou l’écrou en suivant les recommandations
du fabricant. L’attelage peut rester sur le vélo lorsque la
remorque n’est pas accrochée.
Axe traversant : Vous trouverez des informations sur le
réglage et l’installation propres à votre vélo sur Burley.com.
2. Accrochage de la barre de remorquage à l’attelage
: Insérez le raccord souple entre les deux trous sur
l’attelage. Insérez la goupille de sécurité et fermez le
dispositif de retenue. Enroulez la sangle de sécurité autour
du cadre du vélo deux fois et accrochez-la à l’anneau
d’arrimage sur la barre de remorquage (Figure 18).
Conexión de su remolque
1. Colocación del enganche en la bicicleta: quite la
liberación rápida o la tuerca del lado izquierdo del eje
de la rueda trasera de la bicicleta. Instale el enganche
entre la liberación rápida o la tuerca y el marco (figura
17). Apriete la liberación rápida o la tuerca de acuerdo
con la recomendación del fabricante. El enganche
puede permanecer en la bicicleta cuando se quita el
remolque.
Eje pasante: consulte Burley.com para conocer cómo
montarlo e instalarlo correctamente en la bicicleta.
2. Colocación de la barra de remolque en el enganche:
inserte el conectador flexible entre los dos orificios del
enganche. Inserte el pasador de bloqueo y cierre el
retén. Envuelva la correa de seguridad alrededor del
marco de la bicicleta dos veces y engánchela al anillo
en forma de D de la barra de remolque (figura 18).
Ankoppeln Ihres Anhängers
1. Montage der Anhängerkupplung an Ihrem Fahrrad:
Entfernen Sie den Schnellverschluss oder die Mutter
von der linken Seite der hinteren Radachse des
Fahrrads. Montieren Sie die Anhängerkupplung
zwischen dem Schnellverschluss oder der Mutter
und dem Rahmen (Abbildung 17). Ziehen Sie
den Schnellverschluss oder die Mutter gemäß
den Empfehlungen des Herstellers fest. Die
Anhängerkupplung kann am Fahrrad verbleiben, wenn
der Anhänger entfernt wurde.
Steckachse: Wenden Sie sich an Burley.com, um
Informationen zur korrekten Montage an Ihr Fahrrad zu
erhalten.
2. Ankoppeln der Zugstange an der Anhängerkupplung:
Stecken Sie das flexible Verbindungsstück zwischen
die beiden Löcher der Anhängerkupplung. Stecken
Sie den Sicherungsstift hinein und schließen Sie
die Arretierung. Wickeln Sie den Sicherungsriemen
zweimal um den Fahrradrahmen und befestigen Sie
ihn an der Öse an der Zugstange (Abbildung 18).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley D-Lite 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley D-Lite 2019 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info