Manual Burley Cub X (page 8 of 40) (English, German, French, Spanish)

772365

Zoom out

Zoom in

1/40

CHILD TRAILER

8ENG

Locking the Brake

1. To lock the brake, slide the lever to the right

(Figure 19). To release the brake, slide the lever

to the left.

Figure 19

Figure 22 Figure 23

Securing the Cover and Flag

1. Secure the buckle on the hook. The webbing can be

tightened by adjusting the Velcro on the strap (Figure 22).

2. Depress the yellow button and slide the flag pole into

hole on flag holder. To release, push button and lift flag

pole out (Figure 23).

Installing Additional Lights

Fabric loops are located on the back of the bag and should be

used to attach additional lights and/or reflectors (See page 4).

Adjusting the Handlebar

1. Tow mode: Always rotate the handlebar forward when trailer

is in towing mode (Figure 20A). The handlebar should be

horizontal and parallel to the ground, such that the mark on

the handlebar is aligned with the bolt that attaches the cover

(Figure 21).

2. Stroll / Jog mode: The handlebar may be rotated to serve as a

handlebar while trailer is in strolling or jogging mode (Figure

20B). Open lever to rotate (Figure 21) and close lever to lock in

place.

Note: Always use the jogging tether when used as a stroller. The

roll bar lever tension is optimally adjusted from the factory. If

the roll bar slips when lifting up or pushing down – or if it makes

excessive noise when rotating – the lever tension can be fine-

tuned by removing the handlebar cover on the opposite side of the

lever. Release the lever, squeeze the outer frame together and

turn the barrel nut in 180 degree increments. Tighten barrel nut

to desired tension. Then reinstall the handlebar cover.

Figure 20

Figure 21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Burley Cub X in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 15.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Burley Cub X Manual

Product: