632446

Burley Cub 2014 Manual

12
Zoom out
Zoom in
Previous page
1/26
Next page
Figure 5
Figure 6
Installation des garde-roues
Pour les remorques équipées de supports de barre de
remorquage en plastique
1. Superposez le trou dans le garde-roue sur le trou dans le
récepteur de barre de remorquage (Figure 5) et insérez
le boulon par le haut. Serrez bien l’écrou sur le boulon à
l’aide de la clé hexagonale fournie et de la clé de 10 mm.
2. Répétez la procédure pour le garde-roue de l’autre côté
de la remorque.
Pour les remorques équipées de supports de barre de
remorquage en aluminium
1. Insérez les boulons des garde-roues dans le tube du cadre.
Superposez les trous des garde-roues avec les boulons.
Vissez fermement à l’aide de la clé hexagonale (Figure 6).
2. Répétez la procédure pour le garde-roue de l’autre côté
de la remorque.
Instalación de los protectores
de las ruedas
Para remolques con montajes de plástico de la barra
de remolque
1. Junte el orificio del protector de la rueda con el orificio del
receptor de la barra de remolque (figura 5) e inserte el tornillo
desde la parte superior. Ajuste la tuerca al tornillo firmemente
utilizando la llave Allen y la llave inglesa de 10 mm.
2. Repita el procedimiento con el protector de la rueda del otro
lado del remolque.
Para remolques con montajes de aluminio de la barra
de remolque
1. Inserte los tornillos de los protectores de las ruedas a
través del tubo del marco. Haga coincidir los orificios de los
protectores de las ruedas con los tornillos. Apriételos con la
llave Allen hasta que queden bien sujetos (figura 6).
2. Repita el procedimiento con el protector de la rueda del otro
lado del remolque.
Montage der Radabdeckungen
Bei Anhängern mit Kunststoff-Zugstangenhalterungen
1. Richten Sie das Loch in der Radabdeckung auf das
Loch in der Zugstangenhalterung aus (Abbildung 5) und
stecken Sie den Bolzen von oben hinein. Ziehen Sie die
Mutter mithilfe des mitgelieferten Inbusschlüssels und
eines 10-mm-Maulschlüssels mit dem Bolzen fest.
2. Diesen Vorgang für die Radabdeckung auf der anderen
Seite des Anhängers wiederholen.
Bei Anhängern mit Aluminium-Zugstangenhalterungen
1. Bolzen der Radabdeckung durch das Rahmenrohr
einführen. Die Löcher in den Radabdeckungen auf die
Bolzen ausrichten. Mit dem Inbusschlüssel festziehen
(Abb. 6).
2. Diesen Vorgang für die Radabdeckung auf der anderen
Seite des Anhängers wiederholen.
Installing the Wheel Guards
For trailers with plastic tow bar mounts
1. Match hole in wheel guard to hole in tow
bar receiver (Figure 5), and insert bolt from
top. Tighten nut securely to bolt using the
provided hex key and 10mm wrench.
2. Repeat for wheel guard on other side of
trailer.
For trailers with aluminum tow bar mounts
1. Insert wheel guard bolts through frame tube.
Match holes in wheel guards to bolts. Tighten
securely with hex key (Figure 6).
2. Repeat for wheel guard on other side of
trailer.
CHILD TRAILER MANUAL 09
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Cub 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Cub 2014 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info