622539
10
Zoom out
Zoom in
Previous page
1/22
Next page
TSE BUSINESS 5000
English | 10
2.4 Detailed description of selected basic functions
1. Opening the safe using the factory code
Press the On / Enter key
The Code / Fingerp indication is displayed (in case you possess electronics
without fingerscan, Code is displayed instead.)
At this point you are asked to enter the Admin.
Code (factory setting 123456)
The instruction Please turn knob is displayed
Attention: The message Please turn knob implies the action with the knob
of the locking unit, for which the opening code has been entered.
2. Changing the Administrator Code
Press the On / Enter key
The indication of Code / Fingerp is displayed
Press the Function key
The Change code menu is displayed
Press the On / Enter key
The indication of Administrator is displayed
Press the On / Enter key
The indication of the Old code is displayed
At this point you are asked to enter the Admin.
Code (factory setting 123456)
Press the On / Enter key
The indication of the New code is displayed
Enter the new code
Press the On / Enter key
The indication of Repeat code is displayed
Enter the new code
Press the On / Enter key
The indication of Code successfully changed is displayed
3. Creating a user with a code
Press the On / Enter key
The indication of Code / Fingerp is displayed
Press the Function key
The Change code menu is displayed
By pressing the key 2 reach the Administrator menu
Press the On / Enter key
Admin setup Create user is displayed
Press the On / Enter key
Create code is displayed
Press the On / Enter key
At this point you are asked to enter the Admin.
Code (factory setting 123456)
The indication of User 00x is displayed
Please enter the user code and confirm it with ENTER
Press the On / Enter key
FS combination to be confirmed with ENTER is displayed
1
Press the On / Enter key and accordingly the Function key
After confirmation, Save with the On key is displayed.
4. Creating a user with an E-Key
Press the On / Enter key
The indication of Code / Fingerp is displayed
Press the Function key
The Change code menu is displayed
By pressing the key 2 reach the Administrator menu
Press the On / Enter key
Admin setup Create user is displayed
Press the On / Enter key
Create E-Key is displayed
Press the On / Enter key
At this point you are asked to enter the admin.
Code (factory setting 123456)
FS combination to be confirmed with ENTER is displayed
1
Press the On / Enter key and accordingly the Function key
User 00x Store E-Key using ENTER is displayed
Please bring the E-Key in the programming mode.
Press the On / Enter key
E-Key in Prog mode, continue with Enter is displayed
Press the On / Enter key
After confirmation, Save with the On key is displayed
1
If the message FS combination to be confirmed with ENTER is
displayed you have to decide whether the user should get the full
opening right or half of it.
Full opening right: press Function key
Half opening right: press ENTER key
If you create a half opening right the Pin code is only to be allowed
to open with another opening secret e. g. the fingerprint.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burg-Wachter TRSE 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burg-Wachter TRSE 6000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info