779905
94
Zoom out
Zoom in
Previous page
1/321
Next page
MY22B01 - 22_1.0_27.08.2021 93
Operation
3Unfasten and adjust the designated screw
connections, and clamp them with the
maximum tightening torque for the clamping
screws of the handlebars.
6.5.4.6 Adjust saddle tilt
The saddle tilt must be adjusted to the seat height,
the saddle and handlebar position, and the saddle
shape to ensure an optimum fit. The seating
position can be optimised in this way if needed.
The saddle prevents the rider from slipping
backwards or forwards when placed in a
horizontal position. This avoids seat problems. In
any other position, the tip of the saddle may press
uncomfortably into the crotch area. It is also
recommended that the centre of the saddle is
exactly straight. This ensures that the rider is
seated with their sit bones on the wide rear part of
the saddle.
1Adjust the saddle tilt to horizontal.
2Position saddle middle so that it is completely
straight.
Figure 98: Horizontal saddle tilt with 0° tilt in the centre of
the saddle
The rider is sitting comfortably on the saddle
and does not slip backwards or forwards.
3If the rider tends to slip forwards on the narrow
part of the saddle, adjust the seat position (see
Section 6.6.2.3) or tilt the saddle very slightly
backwards.
6.5.4.7 Checking saddle stability
Check saddle stability after adjusting it; see
Section 7.5.6.
6.5.4.8 eightpins H01 seat post saddle tilt
The saddle prevents the rider from slipping
backwards or forwards when placed in a
horizontal position. This avoids seat problems. In
any other position, the tip of the saddle may press
uncomfortably into the crotch area. It is also
recommended that the centre of the saddle is
exactly straight. This ensures that the rider is
seated with their sit bones on the wide rear part of
the saddle.
1Loosen the rear attachment screw on the seat
post head with a 5 mm Allen key.
Figure 99: Loosening the rear screw
2Adjust saddle tilt by turning the front seat
clamping screw.
3Tighten the rear screw with a torque wrench
and a maximum torque of 8 Nm.
Figure 100: Securing the front and rear screws
Notice
Never tighten the screw on the seat post head
with more than the stipulated torque of 8 Nm as it
could break the seat post.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Iconic Evo - BOSCH Purion 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Iconic Evo - BOSCH Purion 2022 in the language / languages: English as an attachment in your email.

The manual is 33.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Iconic Evo - BOSCH Purion 2022

Bulls Iconic Evo - BOSCH Purion 2022 User Manual - German - 329 pages

Bulls Iconic Evo - BOSCH Purion 2022 User Manual - Dutch - 322 pages

Bulls Iconic Evo - BOSCH Purion 2022 User Manual - French - 322 pages

Bulls Iconic Evo - BOSCH Purion 2022 User Manual - Italian - 323 pages

Bulls Iconic Evo - BOSCH Purion 2022 User Manual - Spanish - 324 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info