779937
50
Zoom out
Zoom in
Previous page
1/105
Next page
MY20B05-42_1.0_18.07.2019 49
Operation
.
Measure the distance between the crown and
the dust wiper of the fork. This distance is the
total deflection of the fork.
Push a temporarily attached cable tie
downward against the dust wiper of the fork.
Put on your usual bicycling clothing, including
luggage.
Sit on the pedelec in your usual riding position
and support yourself (e.g. against a wall or
tree).
Get off the pedelec without allowing it to
deflect.
Measure the distance between the dust wiper
and the cable tie. This dimension is the sag.
The sag value should be between 15% (hard)
and 30% (soft) of the total fork deflection.
Increase or reduce the air pressure until you
have reached the desired sag.
Once the sag is correct, re-tighten the blue air
cover cap clockwise.
If you cannot achieve the desired sag, you may
need to make an internal adjustment. For this
purpose, contact your specialist dealer.
6.2.5.3 Adjusting the steel suspension fork
negative deflection
Only applies to pedelecs with this equipment
You can adjust the fork by tensioning the spring to
the rider's weight and their preferred riding style.
It is not the coil spring hardness which is adjusted;
it is its pre-tensioning. This reduces the fork's
negative deflection when the rider sits on the
pedelec.
Figure 57: Negative deflection setting wheel on the
suspension fork crown
The setting wheel may be located under a
plastic cover on the suspension fork crown.
Remove the plastic cover by pulling it off
upwards.
Turn the negative deflection setting wheel in a
clockwise direction to increase the spring pre-
tensioning. Turn the negative deflection setting
wheel in an anti-clockwise direction to reduce
it.
The ideal setting in relation to the weight of the
rider has been achieved when the shock
absorber deflects 3 mm under the stationary
load of the rider. Reattach the cover after the
adjustment.
Rider weight AION, NEX XCR 32, XCR 34
< 55 kg 35 - 50 psi 40 - 55 psi
55 - 65 kg 50 - 60 psi 55 - 65 psi
65 - 75 g 60 - 70 psi 65 - 75 psi
75 - 85 kg 70 - 85 psi 75 - 85 psi
85 - 95 kg 85 - 100 psi 85 - 95 psi
< 100 kg + 105 psi + 100 psi
Max. pressure 150 psi 180 psi
Table 29: Filling pressure table for Suntour air forks
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Ebikes Shimano 6100 - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Ebikes Shimano 6100 - 2020 in the language / languages: English as an attachment in your email.

The manual is 11.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Ebikes Shimano 6100 - 2020

Bulls Ebikes Shimano 6100 - 2020 User Manual - German - 106 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - Dutch - 107 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - French - 108 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - Italian - 110 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - Spanish - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info