779937
46
Zoom out
Zoom in
Previous page
1/105
Next page
MY20B05-42_1.0_18.07.2019 45
Operation
within its permitted displacement range only
(marked on the saddle stay).
Figure 49: Knee cap perpendicular line
6.2.3 Adjusting the handlebars
6.2.3.1 Adjusting the stem
6.2.3.2 Adjusting the height of the handlebars
Open the clamping lever.
Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
You feel the locking lever click into place.
Pull out the handlebars to the required height.
Lock the quick release.
Figure 50: Open (2) and closed (1) clamping lever on the
stem; by.schulz speedlifter used as an example
The handlebar settings must only be adjusted
while the pedelec is stationary.
Unfasten and adjust the designated screw
connections, and clamp them with the
maximum tightening torque for the clamping
screws of the handlebars.
Crash caused by loose stem
Incorrectly fastened screws may come loose due
to impact. The stem may no longer be firmly fixed
in its position as a result. This will cause a crash
with injuries.
Check the handlebars and the quick release
system are firmly in position after the first two
hours of riding.
90°
CAUTION
!
Crash caused by incorrectly set clamping
force
Excessively high clamping force will damage the
quick release and cause it to lose its function.
Insufficient clamping force will cause a
detrimental transmission of force. This can cause
components to break. This will cause a crash with
injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified
set clamping force.
CAUTION
!
1
2
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Ebikes Shimano 6100 - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Ebikes Shimano 6100 - 2020 in the language / languages: English as an attachment in your email.

The manual is 11.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Ebikes Shimano 6100 - 2020

Bulls Ebikes Shimano 6100 - 2020 User Manual - German - 106 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - Dutch - 107 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - French - 108 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - Italian - 110 pages

Bulls Ebikes Shimano 6100 - 2020 User Manual - Spanish - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info