779872
159
Zoom out
Zoom in
Previous page
1/234
Next page
MY22B01 - 12_1.0_26.08.2021 158
Cleaning and servicing
7.5.4 Checking the stem
The stem and quick release system must be
inspected at regular intervals. The specialist
dealer should adjust them if they require
adjustment.
If the hexagon socket head screw is also
loosened, the headset backlash also needs to
be adjusted. Medium-strength thread locker,
such as Loctite blue, then needs to be applied
to the loosened screws and the screws
tightened as per specifications.
Check metal contact surfaces on cone, stem
clamping screw and fork steerer for corrosion.
Take pedelec out of service if there is any wear
or signs of corrosion. Contact specialist dealer.
7.5.5 Check the handlebars
1Take hold of handlebars with both hands on the
handles.
2Move handlebars up and down and press to tilt.
If the handlebars move, contact specialist
dealer.
3Place front wheel in position where it can't
move sideways (e.g. in a bike stand).
4Hold handlebars firmly with both hands.
5Check if the handlebars are able to twist
against the front wheel.
If the handlebars can move, contact your
specialist dealer.
7.5.6 Checking the saddle
1Hold saddle firmly.
2Check whether the saddle twists, tilts or can be
pushed in one direction or other.
If the saddle twists, tilts or can be pushed in
one direction or other, adjust the saddle (see
Section xxx).
Contact your specialist dealer if the saddle
cannot be fixed into position.
7.5.7 Checking the seat post
1Take seat post out of the frame.
2Check seat post for cracks and corrosion.
3Reinsert seat post.
4Check pedal.
5Hold pedal and try to move it sideways toward
the inside or outside. In doing so, observe
whether the crank arm or bearing move
sideways.
If the pedal, crank arm or crank bearing moves
sideways, fasten screw on the pedal crank
rear.
6Hold pedal and try to move it upwards and
downwards vertically. In doing so, observe
whether the pedal, crank arm or crank bearing
moves vertically.
If the pedal, crank arm or crank bearing moves
vertically, fasten screw.
7.5.8 Checking the chain
Check chain for rust or warping.
Replace a rusted chain since it will not be able
to withstand the tensile loads from the drive.
Contact your specialist retailer.
7.5.9 Checking the chain and belt tension
7If a hub gear is fitted, the rear wheel must be
pushed backwards and forwards to tighten the
chain. Contact specialist dealer.
Notice
Excessive chain tension increases wear. If the
chain tension is too low, there is a risk that the
chain will slip off the chain wheels.
Check the chain tension once a month.
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Rider EVO - BOSCH Intuvia 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Rider EVO - BOSCH Intuvia 2022 in the language / languages: English as an attachment in your email.

The manual is 32.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Rider EVO - BOSCH Intuvia 2022

Bulls Cross Rider EVO - BOSCH Intuvia 2022 User Manual - German - 231 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2022 User Manual - Dutch - 233 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2022 User Manual - French - 234 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2022 User Manual - Italian - 236 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2022 User Manual - Spanish - 237 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info