779874
35
Zoom out
Zoom in
Previous page
1/113
Next page
MY21B01 - 12_1.0_09.07.2020 35
Overview
Applies only to eShift with Shimano DI2 automatic hub gears.
Applies only to eShift with NuVinci H|Sync/enviolo with
Optimized H|Sync
Applies only to eShift with Rohloff E-14 Speedhub 500/14.
3.8.6 System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error. You
will find information and a table for all system
messages in Section 6.2.
3.8.7 ABS indicator lamp
The anti-blocking system indicator lamp must light
up after the system has started up and must go
out once speed has reached about 5 km/h. If the
ABS indicator lamp remains unlit when the electric
drive system starts, the ABS is defective. An error
code on the display screen also tells the rider that
it is defective. If the indicator lamp does not go out
after you set off or it lights up while you are riding,
this means there is an error in the anti-blocking
system. The anti-blocking system is inactive in
such a case. The brake system itself remains
functional. It is only the anti-blocking system
control which no longer operates.
If the ABS indicator lamp is lit, the ABS function is
disabled.
indicator Change
Gear adjustment You can use this menu option to
make a fine adjustment to the
Shimano DI2. You'll find the
specified setting range in the gear
manufacturer's operating
instructions. Make the fine
adjustment as soon as you hear any
unusual noises from the gear shift.
This menu option is only shown
when the display is positioned in its
mount.
Gear recovery You can use this menu option to
reset the rear derailleur if it has been
detached – due to a crash or impact
against the derailleur, for example.
You will find a description of how to
reset the gear shift in the gear shift
manufacturer's operating
instructions. This menu option is
only shown when the display is
positioned in its mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the display is positioned in its
mount. This menu option is only
shown if you have an electronic
control gear.
Table 43: Changing the system settings
indicator Change
Gear calibration This is where you can perform a
calibration on the stepless gear.
Press on the Lighting button to
confirm calibration. Then follow the
instructions. You might need to
perform calibration while riding in
the event of a fault. In such cases,
you press on the "Lighting" button
to confirm you require calibration
and then follow the instructions on
the display screen. This menu
option is only shown when the
display is positioned in its mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the display is positioned in its
mount. This menu option is only
shown if you have an electronic
control gear.
Table 44: Changing the system settings
indicator Change
Start gear This is where you can set the start
gear. The automatic gear switch
function is switched off in
Position – –.
This menu option is only shown if
the display is positioned in its
mount.
Gear vx.x.x.x: this is the gear software version.
This menu option is only shown
when the display is positioned in its
mount. This menu option is only
shown if you have an electronic
control gear.
Table 45: Changing the system settings
Notice
The anti-blocking system indicator lamp may light
up if the front and rear wheels are rotating at
widely different speeds from one another – for
example, if the rider cycles on the rear wheel only
or if a wheel is rotating for a unusually long time
without making contact with the ground (fitting
stand). The anti-blocking system switches off in
such cases.
1Stop pedelec to reactivate the anti-blocking
system.
2Restart pedelec (turn off and on again).
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Rider EVO - BOSCH Intuvia 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Rider EVO - BOSCH Intuvia 2021 in the language / languages: English as an attachment in your email.

The manual is 16.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Rider EVO - BOSCH Intuvia 2021

Bulls Cross Rider EVO - BOSCH Intuvia 2021 User Manual - German - 118 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2021 User Manual - Dutch - 113 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2021 User Manual - French - 119 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2021 User Manual - Italian - 117 pages

Bulls Cross Rider EVO - BOSCH Intuvia 2021 User Manual - Spanish - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info