779921
83
Zoom out
Zoom in
Previous page
1/102
Next page
MY20B02-22_1.0_28.05.2019 83
Cleaning and servicing
7.4.2 Checking the tyres
Check the tyre wear. The tyre is worn if the
anti-puncture protection or the carcass cords
are visible.
A specialist dealer will need to change the tyre
if it is worn.
7.4.3 Checking the rims
Check the rims for wear. The rims are worn as
soon as the black, all-round groove on the pad
friction surface becomes invisible.
Worn rims must be replaced by a specialist
dealer.
We recommend that you also replace the rims
at the same time as every second brake lining
replacement.
7.4.4 Check and correct tyre pressure
7.4.4.1 Dunlop valve
The tyre pressure cannot
be measured on the
simple Dunlop valve. The
tyre pressure is therefore
measured in the filling
hose when pumping slowly
with the bicycle pump.
It is recommendable to use
a bicycle pump with a
pressure gauge. The
operating instructions for
the bicycle pump must be
adhered to.
Unscrew and remove
the valve cap.
Connect the bicycle
pump.
Pump up the tyre slowly and pay attention to
the tyre pressure in the process.
Correct the tyre pressure according to
specifications in the Bike pass.
If the tyre pressure is too high, unfasten the
union nut, let out air and tighten the union nut
again.
Remove the bicycle pump.
Screw the valve cap tight.
Screw the rim nut gently against the rim with
the tips of your fingers.
7.4.4.2 Presta valve
It is recommendable to use a bicycle pump with a
pressure gauge. The
operating instructions for
the bicycle pump must be
observed.
Unscrew and remove the
valve cap.
Open the knurled nut
around four turns.
Carefully apply the bicycle
pump so that the valve
insert is not bent.
Pump up the tyre slowly
and pay attention to the
tyre pressure in the process.
The tyre pressure has been adjusted as per the
specifications.
Remove the bicycle pump.
Tighten the knurled nut with your fingers.
Screw the valve cap tight.
Screw the rim nut gently against the rim with the
tips of your fingers.
7.4.4.3 Schrader valve
It is recommendable to use a bicycle pump with a
pressure gauge. The operating instructions for
the bicycle pump must be adhered to.
Unscrew and remove the valve cap.
Connect the bicycle pump.
Pump up the tyre slowly
and pay attention to the
tyre pressure in the
process.
The tyre pressure has
been adjusted as per the
specifications.
Remove the bicycle pump.
Screw the valve cap tight.
Screw the rim nut gently against the rim with
the tips of your fingers.
1
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Mover Evo - Brose Topology 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Mover Evo - Brose Topology 2020 in the language / languages: English as an attachment in your email.

The manual is 11.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Mover Evo - Brose Topology 2020

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - German - 104 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Dutch - 101 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - French - 100 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Italian - 103 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info