779921
75
Zoom out
Zoom in
Previous page
1/102
Next page
MY20B02-22_1.0_28.05.2019 75
Operation
6.13.5 Adjusting the rebound in a Rock
Shox damper
Only applies to pedelecs with this equipment
The rebound damper determines the speed at
which the fork rebounds to full length after
deflection. This speed affects the wheel's contact
with the ground and thus has an influence on
control and efficiency. The rear frame damper
should rebound fast enough to sustain traction
without producing an erratic or bumpy sensation.
If rebound damping is too tight, the rear frame
damper is unable to rebound fast enough before
the next impact. The rebound damper for the rear
wheel is located in the rear frame damper.
Figure 82: Setting the rebound damper strength on the
rear frame damper setting wheel (1)
Turn the setting wheel to the middle position.
Ride the pedelec over a small obstacle.
The ideal setting for the rebound damper has
been achieved when the rebound movement of
the rear wheel feels comparable to that of the
front wheel.
If the rear wheel bounces back much more
quickly or slowly than the front wheel, change the
setting by turning the setting wheel.
Turn the setting wheel in an anti-clockwise
direction to increase the rebound speed.
Turn the setting wheel in a clockwise direction to
decrease the rebound speed.
6.13.6 Adjusting the compression in a
Rock Shox damper
Only applies to pedelecs with this equipment
The compression damper controls the speed at
which the rear frame damper deflects during slow
impact, such as smaller impacts or when the rider
goes round a corner or shifts their weight. The
damper improves control and efficiency.
If the compression damper is set too high, the
suspension is too hard during impacts. The lever
is used to set the compression damper.
Turn the setting wheel in a clockwise direction (+)
to decrease the deflection speed.
Turn the setting wheel in an anti-clockwise
direction (–) to increase the deflection speed.
Figure 83: Setting the compression damper strength
using the rear frame damper setting lever (1)
2
2
3
1
1
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Mover Evo - Brose Topology 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Mover Evo - Brose Topology 2020 in the language / languages: English as an attachment in your email.

The manual is 11.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Mover Evo - Brose Topology 2020

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - German - 104 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Dutch - 101 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - French - 100 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Italian - 103 pages

Bulls Cross Mover Evo - Brose Topology 2020 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info