779873
160
Zoom out
Zoom in
Previous page
1/234
Next page
MY22B01 - 12_1.0_26.08.2021 159
Cleaning and servicing
7.5.9.1 Checking the derailleur gears
The chain is tensioned by the rear derailleur in
pedelecs with derailleur gears.
1Place the pedelec on stand.
2Check to see if the chain is sagging (visual
inspection).
3Gently press the rear derailleur forwards to
check whether it moves and whether it goes
back into position by itself.
If the chain is sagging or the rear derailleur
does not go back into position by itself, contact
your specialist dealer.
7.5.9.2 Checking the hub gear
In the case of pedelecs with a hub gear or back-
pedal brake, the chain or the belt is tensioned by
a eccentric bearing in the bottom bracket axle.
Special tools and specialist knowledge are
required to tension the chain. Contact specialist
dealer.
Remove the chain guard on pedelecs with a
circumferential chain guard.
1Place the pedelec on stand.
2Check the chain and belt tension in three or
four positions, turning the crank a full
revolution.
Figure 148: Checking the chain tension
If the chain or the belt can be pushed more than
2 cm, the chain will need to be re-tensioned.
Contact specialist dealer.
If the chain or belt can only be pushed up and
down less than 1 cm, you will need to the chain
or belt slightly. Contact specialist dealer.
The ideal chain and belt tension has been
achieved if the chain can be pushed between a
maximum of 10 and 15 mm in the middle
between the pinion and the toothed wheel. The
crank must also turn without resistance.
7.5.10 Checking the gear shift
1Check whether all gear shift components are
free of damage.
2Contact your specialist dealer if components
are damaged.
3Place the pedelec on stand.
4Turn the pedal crank clockwise.
5Switch through all speeds.
6Check that pedelec can switch through all
speeds without making unusual noises.
7Adjust the gear shift if gears can not be
changed correctly.
7.5.10.1 Electric gear shift
1Check the cable connections for damage and
corrosion and ensure they are firmly in
position.
If cable connections are loose, damaged or
corroded, contact your specialist dealer.
7.5.10.2 Mechanical gear shift
1Change gear a number of times. Check
whether the Bowden cables get stuck or they
make scraping noises.
2Check the physical condition of the Bowden
cables for visible damage and check to see if
wire strands are broken.
Have defective Bowden cables replaced.
Contact specialist dealer.
7.5.10.3 Checking the derailleur gears
1Check that there is clearance between the
chain tensioner and spokes.
If there is no clearance or the chain scrapes
against the spokes or tyres, contact your
specialist dealer.
2Check that there is clearance between the
chain or rear derailleur and spokes.
If there is no clearance or the chain scrapes
against the spokes, contact your specialist
dealer.
10-15 mm
10-15 mm
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls Cross Mover EVO - BOSCH Intuvia 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls Cross Mover EVO - BOSCH Intuvia 2022 in the language / languages: English as an attachment in your email.

The manual is 32.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls Cross Mover EVO - BOSCH Intuvia 2022

Bulls Cross Mover EVO - BOSCH Intuvia 2022 User Manual - German - 231 pages

Bulls Cross Mover EVO - BOSCH Intuvia 2022 User Manual - Dutch - 233 pages

Bulls Cross Mover EVO - BOSCH Intuvia 2022 User Manual - French - 234 pages

Bulls Cross Mover EVO - BOSCH Intuvia 2022 User Manual - Italian - 236 pages

Bulls Cross Mover EVO - BOSCH Intuvia 2022 User Manual - Spanish - 237 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info