779866
72
Zoom out
Zoom in
Previous page
1/93
Next page
MY21B03 - 32_1.0_23.12.2020 71
About these operating instructions
8.1.3 Suspension seat post
Only applies to bicycles with this equipment
Maintenance intervals
Special tools, special lubricants and knowledge of
suspension components are required to service
and repair suspension seat posts.
The suspension seat post may be damaged if
procedures are not followed as described. Only
specialist dealers may carry out maintenance on
the suspension seat post.
8.2 Axle with quick release
by.schulz seat post
Check all screws for correct tightening
torques for:
G1 and G2
After 250 km and
every 1,500 km
Suntour suspension seat post
Maintenance 1 Every 100 hours
RockShox suspension seat post
Venting of remote control lever and/or
maintenance of lower seat post unit for:
Reverb™ A1/A2/B1, Reverb Stealth A1/A2/B1/
C1*, Reverb AXS™ A1*
Every 50 hours
Venting of remote control lever and/or
maintenance of lower seat post unit for:
Reverb B1, Reverb Stealth B1/C1*, Reverb
AXS A1*
Every 200 hours
Complete maintenance of seat post for:
Reverb A1/A2, Reverb Stealth A1/A2 Every 200 hours
Complete maintenance of seat post for:
Reverb B1, Reverb Stealth B1 Every 400 hours
Complete maintenance of seat post for:
Reverb AXS A1*, Reverb Stealth C1* Every 600 hours
All other suspension seat posts
Maintenance Every 100 hours
Crash caused by unfastened quick
release
A faulty or incorrectly installed quick release may
become caught in the brake disc and block the
wheel. This will cause a crash.
Install the front wheel quick release lever on
the opposite side to the brake disc.
Crash caused by faulty or incorrectly
installed quick release
The brake disc becomes very hot during
operation. Parts of the quick release may become
damaged as a result. The quick release comes
loose. This will cause a crash with injuries.
The front wheel quick release lever and the
brake disc must be situated on opposite sides.
Crash caused by incorrectly set clamping
force
Excessively high clamping force will damage the
quick release and cause it to lose its function.
Insufficient clamping force will cause a
detrimental transmission of force. The
suspension fork or the frame may break. This will
cause a crash with injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified
set clamping force.
CAUTION
!
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls 2020 in the language / languages: English as an attachment in your email.

The manual is 8.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls 2020

Bulls 2020 User Manual - German - 94 pages

Bulls 2020 User Manual - Dutch - 93 pages

Bulls 2020 User Manual - French - 94 pages

Bulls 2020 User Manual - Italian - 94 pages

Bulls 2020 User Manual - Spanish - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info