779866
57
Zoom out
Zoom in
Previous page
1/93
Next page
MY21B03 - 32_1.0_23.12.2020 56
Operation
Threshold
The damping threshold prevents deflection until a
medium impact or downward force occurs.
Threshold mode increases drive efficiency over
level terrain.
The threshold setting can be used to improve
pedalling efficiency over flat, hilly, level or slightly
rugged terrain. In threshold mode, higher bicycle
speeds lead to greater impact force when a
bicycle hits a bump, causing the fork to deflect,
and the bump is absorbed.
The fork threshold
When the compression adjuster is in the open
position (against the stop in an anti-clockwise
direction), the suspension fork deflects quickly
and unhindered through its entire deflection
range when an impact or downward force occurs.
When the compression adjuster is in the
threshold position, the suspension fork
counteracts deflection until a medium impact or
downward force occurs.
When the compression adjuster is in the blocked
position (against the stop in a clockwise direction),
the suspension fork counteracts deflection
throughout its deflection range until a strong
impact or downward force occurs.
The rear frame damper threshold
When the compression adjuster is in the open
position, the rear frame damper deflects quickly
and unhindered through its entire deflection
range.
When the compression adjuster is in the
threshold position, the rear frame damper
counteracts deflection until a medium impact or
downward force occurs.
When the compression adjuster is in the blocked
position, the rear frame damper counteracts
deflection throughout its deflection range until a
strong impact or downward force occurs.
6.11.1.1 Adjusting the Suntour compression
adjuster
Only applies to bicycles with this equipment
Figure 77: Suntour compression adjuster in open (1) and
closed (2) position
The compression adjuster is open in the OPEN
position.
The compression adjuster is blocked in the
LOCK position.
The positions between OPEN and LOCK
provide fine adjustment of compression
damping. We recommend setting the
compression adjuster to the OPEN position
first.
1
2
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulls 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulls 2020 in the language / languages: English as an attachment in your email.

The manual is 8.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bulls 2020

Bulls 2020 User Manual - German - 94 pages

Bulls 2020 User Manual - Dutch - 93 pages

Bulls 2020 User Manual - French - 94 pages

Bulls 2020 User Manual - Italian - 94 pages

Bulls 2020 User Manual - Spanish - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info