671803
6
Zoom out
Zoom in
Previous page
1/112
Next page
2 Notes on the documentation
4 Installation instructions 0020246836_02
2 Notes on the documentation
2.1 Observing other applicable documents
You must observe all the operating and installation in-
structions included with the system components.
2.2 Storing documents
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3 Validity of the instructions
These instructions apply only to:
Product article number
FE 300/3 MR
0010020650
FE 400/3 MR
0010020651
FE 500/3 MR
0010020652
FES 300/3 MR
0010020653
FES 400/3 MR
0010020654
FES 500/3 MR
0010020655
FEW 300/3 MR
0010020656
FEW 400/3 MR
0010020657
FEW 500/3 MR
0010020658
FEWS 400/3 MR
0010020659
FEWS 500/3 MR
0010020660
3 Product description
3.1 Data plate
Explanations for the data plate can be found in the operating
instructions for this product.
3.2 CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
4 Set-up, installation and start-up
You can find more detailed information about set-up, installa-
tion and start-up in the enclosed text-free/illustrated installa-
tion instructions.
5 Setting the target cylinder
temperature
Danger!
Risk of death from legionella.
Legionella multiply at temperatures below
60 °C.
Ensure that the end user is familiar with
all of the Anti-legionella measures in order
to comply with the applicable regulations
regarding legionella prevention.
1. Set the target cylinder temperature.
Water temperature: 60
2. Check the water hardness.
Water hardness: > 3.57 mol/m³
Soften the water.
3. Check the conductivity of the water.
Conductivity at 20 °C between: 100 1,250 µS/cm
Take measures to protect against corrosion.
4. Observe the applicable regulations regarding legionella
prevention.
6 Handing over to the operator
1. Teach the end user how to handle the installation. An-
swer any questions the operator may have. In particu-
lar, draw attention to the safety information which the
operator must follow.
2. Explain to the operator how the safety devices work and
where they are located.
3. Inform the end user that they must have the product
maintained in accordance with the specified intervals.
4. Provide the operator with all relevant instructions and
unit documentation for safe-keeping.
5. Inform the end user about the ways to limit the domestic
hot water outlet temperature so that scalding can be
prevented.
6. Inform the end user about the legionella protection
measures that have been taken.
7 Troubleshooting
7.1 Detecting and rectifying faults
If problems occur whilst operating the product, check
certain points with the aid of the table in the appendix.
Detecting and eliminating faults ( Page 6)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bulex FE 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bulex FE 300 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info